710 Print Shop - Patrick Proxy Core Attachment (Proxy Core Sold Separately)

The 710 Print Shop Patrick Proxy Core Attachment is a 3D-printed pink cartoon starfish figure with a recess in its back that a Puffco Proxy Core drops into. The Proxy Core is not included — this listing is the printed figure only. For the Proxy v2 Core only. $29.99 at Angies Boutique, 838 N Broadway, Los Angeles.

⚡ At-a-Glance Decision Summary

• What it is: A seated pink starfish figure that holds a Puffco Proxy Core in a recess behind it.
• What you get: The printed figure. No Proxy Core, no device.
• Hard requirement: Proxy v2 Core. 710 Print Shop: it will not work with the v1.
• What it is not: An unofficial printed novelty. Not licensed or official merchandise.
• Made by: 710 Print Shop, Long Beach, California. Only 3 in stock at Angies Boutique.

🧠 Our Verdict

The only figure in the range rather than an object, and the only one that partly hides the Core instead of showing it off.

Quick Summary

A multi-colour printed figure, pink with white and black detail, on a flat base. The Core seats in a recess at the back. Solid — no storage. The Core is sold separately.

710 Print Shop Patrick Proxy Core Attachment – Proxy Core Not Included

A Proxy Core is a smooth cylinder with no flat side, so on a table it rolls. Most of the 710 Print Shop stands sit the Core on top, where it becomes the tallest part of the piece. This one puts it behind instead: the figure sits at the front on a flat base and the Core drops into a recess in its back.

Browse the rest of the range in Puffco Proxy Adapters.

Summary: A printed figure stand for the Puffco Proxy v2 Core, supplied on its own.

⭐ Who This Product Is For / Not For

Ideal For:

• Proxy v2 owners who want a character piece rather than an object replica.
• Anyone who would rather the Core sat behind something than on top of it.
• Collectors of the 710 Print Shop range — this is the only figure of the six.

Not Recommended For:

• Anyone who does not already own a Core — start with the Puffco Proxy Core at $49.99 or the full Proxy Core Kit at $234.99.
• Proxy v1 owners. 710 Print Shop state it will not work with the v1 Core.
• Anyone who wants storage — the Pelon at $29.99 is the one with a compartment in its base.
• Anyone expecting official merchandise. This is a small-batch printed novelty.

⚠️ Known Limitations

• The Proxy Core is not included. The black Core in the photograph is there to show fit and scale. You are buying the printed figure.
• Unofficial novelty. Made and printed by 710 Print Shop. It is not licensed merchandise and carries no official affiliation.
• v2 only. 710 Print Shop's own wording: please ensure you're using the v2 version, as it won't work with the v1.
• It is solid. Nothing opens, it holds no liquid, and there is no storage compartment inside.
• Print-to-print variation. 710 Print Shop note that 3D printing can cause slight differences in colour or detail, and that they inspect each print before it ships. Fine detail on a figure shows this more than a plain shape does.

Summary: A solid, unofficial printed v2-only figure, sold without the Core.

🔹 Features & Benefits

• Rear-mounted recess: The Core sits behind the figure rather than on top of it.
• Multi-colour print: Pink body with white and black detail, printed rather than painted on.
• Flat seated base: Wide footprint, so it stays put on a shelf.
• The only figure in the range: Everything else 710 Print Shop make for the Proxy is an object.
• Made in Long Beach: Printed to order by 710 Print Shop.

Summary: A printed figure that keeps a Proxy Core upright and mostly out of sight.

🔌 Compatibility & Requirements

• Fits: Puffco Proxy v2 Core.
• Does not fit: Puffco Proxy v1 Core.
• Required, sold separately: A Proxy Core, $49.99.
• Not a glass attachment: It does not replace a bubbler, chamber or carb cap.
• Age restriction: Sold to adults 21 and over only.

🛠️ How to Use

1. Confirm your Core is the v2 version before ordering.
2. Set the figure on a flat surface, base down.
3. Lower the Core nose-up into the recess at the back.
4. Lift the Core out to use it; the figure stays where it is.

Not sure which generation you own? Our Proxy Core vs Proxy guide explains the difference.

🧴 Care & Maintenance

• Wipe with a dry or barely damp cloth.
• Keep isopropyl off it — solvents haze printed plastic and can lift colour.
• Use a soft brush around the printed detail rather than a cloth, which catches.
• Keep it out of a hot car. Printed plastic softens well below glass temperatures.

Summary: Dry-wipe only, brush the detail, no solvents, no heat.

📊 Comparison

Summary: Same $29.99 as the Toilet and Pelon, and the only one where the Core is not the top of the piece.

💬 Common Questions & Answers

Q: Does the Proxy Core come with this?
A: No. You are buying the printed figure on its own. The black Core in the photograph is there to show how it seats, and is sold separately — $49.99 for the Core, or $234.99 for the complete Proxy Core Kit.

Q: Will it fit my Puffco Proxy?
A: It fits the Proxy v2 Core. 710 Print Shop's guidance reads: please ensure you're using the v2 version, as it won't work with the v1. Check which generation you own before ordering.

Q: Is this official merchandise?
A: No. It is an unofficial 3D-printed novelty made in Long Beach by 710 Print Shop, with no licence or official affiliation. If you want something licensed, this is not it.

Q: Where does the Core actually sit?
A: In a recess at the back of the figure, not on top. From the front you see mostly the figure and only the upper part of the Core behind it.

Summary: A solid, unofficial v2-only printed figure with a rear recess, sold without the Core.

🛒 Complete Your Proxy Setup

Add the Puffco Proxy Core if you need one, browse the full Puffco Proxy Adapters range, or read our Puffco Proxy collection guide.

✅ Authentic & Ready to Ship

Made by 710 Print Shop in Long Beach, California, as an unofficial printed novelty. It ships as the printed figure only — no Puffco Proxy Core or device is included. 710 Print Shop publish no GTIN for this item, so no barcode is asserted. Angies Boutique has traded from 838 N Broadway, Los Angeles, CA 90012 since 1990, with same-day in-store collection. Only three in stock. Sold to adults 21 and over only.