710 Print Shop - Toilet Proxy Core Attachment (Proxy Core Sold Separately)

The 710 Print Shop Toilet Proxy Core Attachment is a 3D-printed stand that holds a Puffco Proxy Core upright in a miniature toilet, lid and all. The Proxy Core shown in the photo is not included — this listing is the printed toilet only. Fits the Proxy v2 Core; it does not fit v1. $29.99 at Angies Boutique, 838 N Broadway, Los Angeles.

⚡ At-a-Glance Decision Summary

• What it is: A 3D-printed toilet-shaped base for a Puffco Proxy Core.
• What you get: The printed toilet. No Proxy Core, no device, no glass.
• Hard requirement: Proxy v2 Core only — 710 Print Shop state it will not work with v1.
• Why choose it: Your Core stands up and stays put instead of rolling around a table.
• Made by: 710 Print Shop, Long Beach, California. 3 in stock at Angies Boutique.

🧠 Our Verdict

Buy it if you already own a Proxy v2 Core and want somewhere to park it that is funnier than a coaster.

Quick Summary

A small white commode with a working lid that cradles a Proxy Core in the bowl. It is a display stand — nothing about it touches the vapour path. The Core in the photograph shows scale and fit, and is sold separately.

710 Print Shop Toilet Proxy Core Attachment – Proxy Core Not Included

A Proxy Core is a smooth black cylinder with nothing flat on it, so it rolls. Most owners end up standing theirs in a mug. 710 Print Shop's answer is a tiny toilet: the Core sits in the bowl, the lid props open behind it, and the whole thing holds its place on a desk or shelf.

Browse the rest of the range in Puffco Proxy Adapters.

Summary: A 3D-printed toilet stand for the Puffco Proxy v2 Core, supplied on its own.

⭐ Who This Product Is For / Not For

Ideal For:

• Proxy v2 Core owners tired of theirs rolling off the table.
• Anyone buying a gift for a Proxy owner under $30.

Not Recommended For:

• Anyone who does not already own a Core — start with the Puffco Proxy Core at $49.99 or the full Proxy Core Kit at $234.99.
• Proxy v1 owners. 710 Print Shop state this base will not work with the v1 Core.
• Anyone after a functional upgrade — the Proxy Joystick Cap at $34.99 is the part that changes how it hits.

⚠️ Known Limitations

• The Proxy Core is not included. The Core in the product photo is shown for fit and scale only. You are buying the printed toilet.
• v2 only. 710 Print Shop's own guidance: make sure you are using the v2 version, as it will not work with the v1.
• Print-to-print variation. 710 Print Shop note that 3D printing can cause slight differences in colour or detail, and that they inspect each print before it ships. Yours will not be identical to the photograph.
• It is a stand, not a part. No filtration, no airflow, no contact with vapour.
• Printed plastic. Keep it away from a hot banger or a torch.

Summary: A printed v2-only display base with normal print variation, sold without the Core.

🔹 Features & Benefits

• Holds the Core upright: The bowl cradles the Core so it stops rolling.
• Working lid: Props open behind the Core, closes over the bowl when it is empty.
• Printed to order in Long Beach: Made by 710 Print Shop, not mass-moulded overseas.
• Desk-safe footprint: A flat base that sits still on a shelf or nightstand.
• Gift-priced: $29.99, and it needs no explaining when someone opens it.

Summary: A small-batch printed stand that keeps a Proxy Core upright.

🔌 Compatibility & Requirements

• Fits: Puffco Proxy v2 Core.
• Does not fit: Puffco Proxy v1 Core — stated by 710 Print Shop.
• Required, sold separately: A Proxy Core, $49.99.
• Not a glass attachment: It does not replace a bubbler, chamber or carb cap.
• Age restriction: Sold to adults 21 and over only.

🛠️ How to Use

1. Confirm your Core is the v2 version before ordering.
2. Lift the lid and set the toilet on a flat surface.
3. Lower the Core into the bowl so it rests upright.
4. Close the lid when the Core is out and in use.

Not sure which generation you own? Our Proxy Core vs Proxy guide explains the difference.

🧴 Care & Maintenance

• Wipe with a dry or barely damp cloth.
• Keep isopropyl off it — solvents haze printed plastic.
• No hot bangers, torches or heated tips near it.
• Keep it out of a hot car. Printed plastic softens well below glass temperatures.

Summary: Dry-wipe only, no solvents, no heat.

📊 Comparison

Summary: The Toilet is the only one here that changes nothing about performance, and that is the point.

💬 Common Questions & Answers

Q: Does the Proxy Core come with this?
A: No. You are buying the printed toilet on its own. The black Proxy Core in the photograph is there to show how it sits in the bowl, and is sold separately — $49.99 for the Core, or $234.99 for the complete Proxy Core Kit.

Q: Will it fit my Proxy?
A: It fits the Proxy v2 Core. 710 Print Shop's guidance reads: please ensure you're using the v2 version, as it won't work with the v1. Check which generation you own before ordering.

Q: Will mine look exactly like the photo?
A: Close, not identical. 710 Print Shop print these individually and state that 3D printing can cause slight variations in colour or detail, adding that they inspect each print before it ships.

Q: Does it change how the Proxy performs?
A: No. No air passes through it and nothing touches the heating chamber. For a functional change, look at the Joystick Cap for airflow or the Nope 2 Dope adapter for Pivot tips.

Summary: A v2-only printed display base, sold without the Core, that changes nothing about how the Proxy works.

🛒 Complete Your Proxy Setup

Add the Puffco Proxy Core if you need one, browse the full Puffco Proxy Adapters range, or read our Puffco Proxy collection guide.

✅ Authentic & Ready to Ship

Made by 710 Print Shop in Long Beach, California. It ships as the printed toilet only — no Puffco Proxy Core, device or glass is included. 710 Print Shop publish no GTIN for this item, so no barcode is asserted. Angies Boutique has traded from 838 N Broadway, Los Angeles, CA 90012 since 1990, with same-day in-store collection. Three units in stock. Sold to adults 21 and over only.