710 Print Shop - Red Solo Cup Proxy Core Attachment (Proxy Core Sold Separately)

The 710 Print Shop Red Solo Cup Proxy Core Attachment is a 3D-printed red party cup that a Puffco Proxy Core seats into, so it stands upright and reads as an ordinary cup on a table. The Proxy Core is not included — this listing is the printed cup only. For the Proxy v2 Core only. $14.99 at Angies Boutique, 838 N Broadway, Los Angeles.

⚡ At-a-Glance Decision Summary

• What it is: A printed red cup stand for a Puffco Proxy Core, ribbed body with a white inner rim.
• What you get: The printed cup. No Proxy Core, no device.
• Hard requirement: Proxy v2 Core. 710 Print Shop state it will not work with the v1.
• Why this one: At $14.99 it is the cheapest stand in the range, and the least conspicuous.
• Made by: 710 Print Shop, Long Beach, California. 10 in stock at Angies Boutique.

🧠 Our Verdict

The one to pick if you want somewhere to park the Core that does not announce itself, and do not want to spend $30 to get it.

Quick Summary

A ribbed red cup with a white inner rim. The Core drops into the top and stands upright. No branding, no moving parts, no storage. The Core is sold separately.

710 Print Shop Red Solo Cup Proxy Core Attachment – Proxy Core Not Included

A Proxy Core has no flat side, so on a table it rolls. The cheapest fix in the 710 Print Shop range is this: a printed party cup, ribbed like the disposable kind, with a white lip and a recess in the top sized for the Core.

Browse the rest of the range in Puffco Proxy Adapters.

Summary: A $14.99 printed cup stand for the Puffco Proxy v2 Core, supplied on its own.

⭐ Who This Product Is For / Not For

Ideal For:

• Proxy v2 owners who want a stand without spending much.
• Anyone who would rather the stand blend in than be a talking point.
• Adding to an order to round it out.

Not Recommended For:

• Anyone who does not already own a Core — start with the Puffco Proxy Core at $49.99 or the full Proxy Core Kit at $234.99.
• Proxy v1 owners. 710 Print Shop state this will not work with the v1 Core.
• Anyone who wants storage as well — the Pelon at $29.99 has a twist-off compartment in its base.
• Anyone who wants the stand to be the centrepiece — the Turbo at $39.99 is the showpiece.

⚠️ Known Limitations

• The Proxy Core is not included. The black Core in the photograph is there to show fit and scale. You are buying the printed cup.
• v2 only. 710 Print Shop's own wording: please ensure you're using the v2 version, as it won't work with the v1.
• It does not hold liquid. It is a printed shell with a recess for the Core, not a functioning cup.
• Print-to-print variation. 710 Print Shop note that 3D printing can cause slight differences in colour or detail, and that they inspect each print before it ships.
• Printed plastic. No torches, hot bangers or heated tips near it.

Summary: A printed v2-only display stand that is not a usable cup and does not include the Core.

🔹 Features & Benefits

• Holds the Core upright: The recess in the top stops it rolling.
• Two-tone print: Red ribbed body against a white inner rim.
• Unbranded: No logos or wordmarks anywhere on the piece.
• Cheapest in the range: $14.99, half the price of the Turbo.
• Made in Long Beach: Printed to order by 710 Print Shop.

Summary: A plain, cheap printed stand that keeps a Proxy Core upright.

🔌 Compatibility & Requirements

• Fits: Puffco Proxy v2 Core.
• Does not fit: Puffco Proxy v1 Core.
• Required, sold separately: A Proxy Core, $49.99.
• Not a glass attachment: It does not replace a bubbler, chamber or carb cap.
• Age restriction: Sold to adults 21 and over only.

🛠️ How to Use

1. Confirm your Core is the v2 version before ordering.
2. Set the cup on a flat surface.
3. Lower the Core nose-up into the recess in the top.
4. Lift the Core out to use it; the cup stays where it is.

Not sure which generation you own? Our Proxy Core vs Proxy guide explains the difference.

🧴 Care & Maintenance

• Wipe with a dry or barely damp cloth.
• Keep isopropyl off it — solvents haze printed plastic.
• Do not put liquid in it.
• Keep it out of a hot car. Printed plastic softens well below glass temperatures.

Summary: Dry-wipe only, no solvents, no liquid, no heat.

📊 Comparison

Summary: The entry price into the printed stands, with the plainest look of the four.

💬 Common Questions & Answers

Q: Does the Proxy Core come with this?
A: No. You are buying the printed cup on its own. The black Core in the photograph is there to show how it seats, and is sold separately — $49.99 for the Core, or $234.99 for the complete Proxy Core Kit.

Q: Will it fit my Puffco Proxy?
A: It fits the Proxy v2 Core. 710 Print Shop's guidance reads: please ensure you're using the v2 version, as it won't work with the v1. Check which generation you own before ordering.

Q: Can I drink out of it?
A: No. It is a printed display stand shaped like a cup, with a recess moulded into the top for the Core. It is not food-safe and it is not watertight.

Q: Is there any branding on it?
A: None. The piece is a plain red cup shape with a white inner rim — no logos, wordmarks or labels anywhere on it.

Summary: A v2-only printed cup-shaped stand, unbranded, sold without the Core.

🛒 Complete Your Proxy Setup

Add the Puffco Proxy Core if you need one, browse the full Puffco Proxy Adapters range, or read our Puffco Proxy collection guide.

✅ Authentic & Ready to Ship

Made by 710 Print Shop in Long Beach, California. It ships as the printed cup only — no Puffco Proxy Core or device is included. 710 Print Shop publish no GTIN for this item, so no barcode is asserted. Angies Boutique has traded from 838 N Broadway, Los Angeles, CA 90012 since 1990, with same-day in-store collection. Ten in stock. Sold to adults 21 and over only.