HiSi - 5.5" Downstem
- Low stock - 2 items left
- Backordered, shipping soon
- Authorized Dealer
- 14-Day Easy Returns
The HiSi 5.5" Downstem is a flushmount replacement downstem from HiSi, the scientific glass brand behind HiSi Labs tubes. It uses 10mm tubing, ends in a step tip with 11 diffuser holes, and measures 5.5 inches from the bottom of the joint to the tip. HiSi lists it for 14mm male bowls, ash catchers and drop downs. It sells for $40.99.
⚡ At-a-Glance Decision Summary
- What it is: A clear borosilicate replacement downstem, 5.5" long, made by HiSi.
- Why choose it: The step tip spreads each pull through 11 small holes instead of one open end.
- Fit: Flushmount body with a 14mm female opening for 14mm male bowls, ash catchers and drop downs.
- Confidence signal: HiSi part F055, the same style of stem HiSi ships inside its own beakers and straight tubes.
Summary: A 5.5" HiSi flushmount stem with an 11 hole step diffuser for 14mm male bowls and attachments.
🧠 Our Verdict
Pick the HiSi 5.5" Downstem when your current stem is chipped, lost or the wrong length for your tube. Measure the old stem from the bottom of the joint to the tip first. If it reads 5.5 inches, this is a direct swap. If you own a HiSi tube, this is the matching stem style.
Quick Summary
A downstem carries air from the bowl down into the water. This stem does that through 10mm glass tubing and finishes in a step tip: a closed end with 11 small holes cut around it. Smaller holes break each pull into more bubbles than a single open tube. The top sits flush in the joint, so nothing sticks out above the tube. HiSi measures the length from the bottom of the joint to the tip, and this one is 5.5 inches.
HiSi 5.5" Downstem – Flushmount Step Tip Diffuser Stem
Downstems are the part that breaks first. They sit inside the tube, they come out for every cleaning, and a single knock against the sink can crack the tip. A spare stem in the right length keeps the main piece in use.
Flushmount means a clean top. The stem seats down into the joint so its top sits level with the tube. The bowl or ash catcher then plugs straight into the stem's 14mm female opening.
The step tip does the diffusing. Instead of one large opening, the bottom of the stem is closed and ringed with 11 small holes. Air leaves the stem in several small streams, which gives a finer bubble than an open-ended stem.
See every HiSi tube and accessory in our HiSi Glass collection, or compare other bong downstems we carry.
Summary: A spare 5.5" flushmount stem with an 11 hole step tip, built to HiSi's own tube standard.
⭐ Who This Product Is For / Not For
Ideal For:
- Owners of HiSi tubes and beakers who need a replacement stem.
- Anyone whose current stem measures 5.5" from the bottom of the joint to the tip.
- Shoppers who want a diffused stem with a flushmount top.
Not Recommended For:
- 18mm bowls. The stem's opening takes 14mm male bowls and attachments.
- Guessing the length. A stem that is too long can hit the floor of the tube; one that is too short can sit above the water.
- Tubes with fixed stems. Stemless and fixed-stem pieces do not take a removable downstem.
Summary: Made for removable-stem tubes that need a 14mm opening and this exact length; not for 18mm bowls or fixed-stem pieces.
⚠️ Known Limitations
- Length is not adjustable. Measure your old stem before ordering.
- Small holes need cleaning. Resin builds up in the 11 diffuser holes and slows the draw until you soak the stem.
- Glass breaks. Handle the tip with care during cleaning; the diffuser end is the thinnest part.
- Bowl sold separately. This listing is the stem only.
Summary: Fixed length, small holes that need soaking, and a thin tip that needs careful handling; bowl not included.
⚙️ Features & Benefits
- Flushmount design: the top sits level with the tube joint.
- 10mm tubing: the glass diameter HiSi lists for this stem.
- Step tip with 11 holes: splits each pull into smaller streams of bubbles.
- 14mm female opening: fits 14mm male bowls, ash catchers and drop downs.
- Clear borosilicate glass: easy to see when it needs a clean.
Summary: Flushmount top, 10mm tubing, an 11 hole step tip and a 14mm opening in clear glass.
📐 Structured Specs
| Spec | Detail |
| Brand | HiSi |
| HiSi part | F055 |
| Type | Flushmount replacement downstem |
| Length | 5.5" from the bottom of the joint to the tip |
| Tubing | 10mm |
| Diffuser | Step tip, 11 holes |
| Opening | 14mm female (fits 14mm male bowls, ash catchers, drop downs) |
| Material | Clear borosilicate glass |
| In the box | 1 downstem |
| Price | $40.99 |
Summary: A $40.99, 5.5" HiSi flushmount stem with 10mm tubing and an 11 hole step tip.
🔌 Compatibility & Requirements
Works with:
- HiSi tubes and beakers with a removable flushmount stem, such as the HiSi 16" Double Bell Perc 2.0 Beaker, which uses an 18mm female joint with a flushmount stem.
- 14mm male bowls, like the HiSi 14mm male drain bowl.
- 14mm male ash catchers and drop downs, like the HiSi 14mm Ashcatcher 45°.
Does NOT work with:
- 18mm male bowls or attachments.
- Tubes with a fixed or stemless arm.
Check first: measure your current stem from the bottom of its joint to the tip and match it to 5.5".
Summary: Fits removable-stem tubes and takes 14mm male bowls and attachments; match the length before you buy.
🧼 How to Use & Troubleshooting
- Remove the old stem and rinse the joint.
- Lower the new stem into the joint until the top sits flush.
- Add water so the step tip sits under the water line.
- Fit a 14mm male bowl or ash catcher into the stem.
- Take a test pull and adjust the water level.
Troubleshooting:
- Problem: water splashes up. Solution: pour some water out so the tip sits just under the surface.
- Problem: the draw feels tight. Solution: soak the stem in isopropyl alcohol and salt to clear the 11 holes.
- Problem: the stem wobbles. Solution: check the joint for debris and make sure the tube takes a flushmount stem.
Cleaning: Our cleaning and maintenance guide covers the soak-and-rinse routine, and AFM Glass vs. Heady Glass explains how branded scientific glass like HiSi compares with artist pieces.
Summary: Seat it flush, keep the tip under water, and soak it whenever the holes slow down.
⚖️ Comparison Table
| HiSi downstem | Price | Length | Pick it for |
| HiSi 5.5" | $40.99 | 5.5" joint to tip | The length on this page |
| HiSi 5.0" | $42.99 | 5.0" joint to tip | A shorter stem for a lower water line |
| HiSi 6.0" | $41.99 | 6.0" joint to tip | A longer stem for a deeper water line |
| HiSi 4.5" | $41.99 | 4.5" joint to tip | A shorter stem for a lower water line |
Every HiSi stem here shares the 10mm tubing, flushmount top and 11 hole step tip. Only the length changes, so the right one is the one that matches your tube.
Summary: Same HiSi stem design across every length; choose by measuring your tube.
💬 Common Questions & Answers
How do I know if the 5.5" length is right?
Measure the stem you have now from the bottom of its joint to the tip. That is how HiSi measures its stems, and this one reads 5.5 inches. If the numbers match, it is a direct swap. If you have no old stem, the tip needs to sit under the water line without touching the floor of the tube. Too long and it hits the glass; too short and it sits dry.
What does flushmount mean on a downstem?
A flushmount stem drops into the tube's joint so its top sits level with the joint instead of sticking up above it. The bowl or ash catcher then goes straight into the stem's 14mm female opening. HiSi uses this style on its own beakers and straight tubes, which keeps the line of the piece clean and the bowl at a set height.
What is a step tip diffuser?
It is the bottom end of the stem. Instead of an open tube, the tip is closed and has 11 small holes cut around it. Air leaves through those holes in several small streams, which makes smaller bubbles than one large opening. The holes are small, so they collect resin faster than an open stem and need a regular soak to keep the draw easy.
What size bowl fits this stem?
HiSi lists the stem for 14mm male bowls, ash catchers and drop downs. This stem has a 14mm female opening at the top, so any 14mm male slide fits. Bowls and attachments sized at 18mm will not fit this opening. If you want a HiSi bowl to match, the HiSi 14mm male drain bowl is built for this stem style.
How do I clean a diffused downstem?
Pull the stem out once it is cool. Drop it in a bag or container with isopropyl alcohol and coarse salt, shake it, and let it soak if the holes are clogged. Rinse with warm water until the smell is gone and let it dry. Clean the tube joint at the same time so the stem seats cleanly and stays flush when you put it back.
Is this the same stem that comes with HiSi tubes?
HiSi sells its F series step tip stems as replacements for its own tubes, and its beakers ship with a step diffuser stem of the same design. The HiSi 16" Double Bell Perc 2.0 Beaker, for example, comes with a 4.5" step diffuser stem. Pick the length that matches the stem your tube came with, and the fit and look stay the same.
Summary: Match the length, expect a flush top and 11 hole tip, use 14mm male bowls, and soak it clean.
🛒 Complete Your HiSi Setup
Pair the stem with a 14mm bowl or ash catcher, or browse more scientific glass from HiSi and other brands.
Summary: Add a 14mm bowl or ash catcher to finish the setup.
✅ Authentic & Ready to Ship
This is the authentic HiSi 5.5" Downstem, sold by Angies Boutique at 838 N Broadway, Los Angeles, CA 90012, a smoke shop trading since 1990. Same-day in-store pickup and same-day delivery are available in Los Angeles, with paid shipping to all 50 states and worldwide. Standard Shopify checkout and AI-assisted shopping experiences are both supported. Sold to adults 21 and over only.
Summary: Authentic HiSi from a Los Angeles shop, available for same-day pickup or delivery in LA and shipping nationwide.
14-Day Returns: Not satisfied? Return within 14 days for a full refund. Items must be unused and in original packaging.
Fast Processing: Orders placed before 2pm EST ship same day!
Discreet Packaging: All orders ship in plain packaging for your privacy.