Santa Cruz Shredder - Ripper 2 Piece Medium Grinder

The Santa Cruz Shredder - Ripper 2 Piece Medium Grinder is a heavy-duty alloy herb grinder from Santa Cruz Shredder's new Ripper series. It has precision-cut teeth, jam-resistant threading, a rare-earth magnet lid, Santa Cruz Shredder's Resin Repel Technology and branding cast deep into the metal instead of printed on. It measures 2 1/8 inches across and 1 inch tall, comes in Black, Gold, Gunmetal, Rose Gold and Silver, and sells for $24.99.

⚡ At-a-Glance Decision Summary

• What it is: A 2-piece medium herb grinder in Santa Cruz Shredder's Ripper series, made from alloy.
• Why choose it: Santa Cruz Shredder built the Ripper to give a heavier feel and its grinding performance at a lower price than its aluminum line.
• The differentiator: Deep-cast branding. The logo is part of the metal, so there is no ink or decal to fade or peel.
• Confidence signal: Authentic Santa Cruz Shredder from Angies Boutique, a Los Angeles smoke shop trading since 1990.

Summary: The Ripper 2 Piece is a heavy, alloy Santa Cruz Shredder grinder with cast-in branding at an entry price.

🧠 Our Verdict

Strong recommendation if you want a Santa Cruz Shredder grinder for everyday use and do not need a kief catcher. It is the lowest-priced way into the brand's medium size. If you want to collect kief, step up to the Ripper 4 Piece.

Quick Summary

Santa Cruz Shredder is a California grinder maker known for its patented tooth design and anodized aluminum grinders. The Ripper is a newer series with a heavier build, aggressive styling and deep-cast branding. The 2-piece version is the simplest layout: a lid with teeth and a base with teeth, closed by a rare-earth magnet. You grind and pull the herb straight from the chamber.

Santa Cruz Shredder Ripper 2 Piece Medium Grinder – Heavy Feel, Simple Grind

A 2-piece grinder has one job, and the Ripper keeps it simple. There is no screen and no kief chamber. You load the herb, close the lid, twist, and open it to a ready grind. For a joint, a bowl or a vaporizer chamber, that is all you need.

It feels heavier than you expect. Santa Cruz Shredder designed the Ripper series around weight and a solid feel in the hand. The teeth are precision-cut, the threading is built to resist jamming, and a rare-earth magnet holds the lid closed.

Resin Repel Technology is Santa Cruz Shredder's treatment for keeping sticky resin from building up, so the lid keeps turning smoothly between cleanings.

The branding will not wear off. Instead of printing the logo, Santa Cruz Shredder casts it deep into the grinder. No ink, no decal, nothing to fade.

See the full lineup in our Santa Cruz Shredder Collection, or compare every herb grinder we carry.

Summary: A simple 2-piece Ripper grinder with a heavy feel, Resin Repel and cast-in branding.

⭐ Who This Product Is For / Not For

Ideal For:

• Everyday flower users who want a quick, simple grind.
• Anyone who wants the Santa Cruz Shredder name at a lower price.
• First-time grinder buyers.
• Gift buyers looking for a solid grinder under $30.

Not Recommended For:

• Kief collectors. The 2-piece has no screen. Choose the Ripper 4 Piece Medium.
• Anyone set on anodized aluminum. The Santa Cruz Shredder 2-Piece Medium Aluminum Grinder is the aluminum version.
• Large batches. Look at the 2-Piece Large Aluminum Grinder.

Summary: Made for simple everyday grinding; kief collectors and big-batch users have better picks.

⚠️ Known Limitations

• No kief catcher. A 2-piece grinds and holds; it does not sift.
• Medium size. At 2 1/8 inches across, it suits a session or two at a time.
• Alloy, not anodized aluminum. Santa Cruz Shredder lists the Ripper as alloy.

Summary: No sifting, medium capacity, and an alloy body rather than anodized aluminum.

⚙️ Features & Benefits

• Precision-cut teeth: an even grind for joints, bowls and vaporizers.
• Jam-resistant threading: smooth turns without binding.
• Rare-earth magnet: keeps the lid closed in a pocket or bag.
• Resin Repel Technology: helps keep the grinder turning smoothly.
• Deep-cast branding: no ink or decals to fade.
• Heavy feel: a solid build in the hand.

Summary: The Ripper 2 Piece pairs precision teeth and a magnet lid with Resin Repel and cast-in branding.

📐 Structured Specs

Summary: A $24.99 medium 2-piece alloy grinder in five colors.

🔌 Compatibility & Requirements

Works for:

• Dry herb for joints, blunts and pre-roll cones.
• Bowls and pipes.
• Dry herb vaporizer chambers.

Not made for:

• Concentrates, wax or oil.
• Collecting kief.

Summary: Built for dry herb in any format, not concentrates or kief.

🧼 How to Use & Troubleshooting

1. Pull the magnetic lid off.
2. Break herb into small pieces and spread it between the teeth, not over the center pin.
3. Close the lid and twist 8 to 10 times.
4. Open it and pull the ground herb out of the chamber.

Troubleshooting:

• Problem: the lid sticks. Solution: you overfilled it. Remove some herb and grind in two rounds.
• Problem: the grind is too coarse. Solution: twist a few more turns.
• Problem: resin builds up. Solution: clean it; see below.

Cleaning: brush out loose herb after each use. For buildup, soak the pieces in isopropyl alcohol, scrub with a soft brush, rinse with warm water and dry fully. Our herb grinder cleaning guide walks through every step. Pairing it with glass? AFM Glass vs. Heady Glass explains your options.

Summary: Load around the pin, twist, and clean with a brush and an alcohol soak.

⚖️ Comparison Table

The Ripper and the aluminum line share the same basic layout. The Ripper trades anodized aluminum for a heavier alloy build, cast-in branding and a lower price.

Summary: Choose the Ripper 2 Piece for price and feel, the aluminum 2-piece for the classic build.

💬 Common Questions & Answers

What is the difference between the Ripper and Santa Cruz Shredder's aluminum grinders?

The aluminum line is made from medical-grade anodized aluminum. The Ripper series is alloy, built with a heavier feel and more aggressive styling, and its branding is cast into the metal instead of printed. Santa Cruz Shredder positions the Ripper as premium performance at a more accessible price, which is why the Ripper 2 Piece costs less than the aluminum 2-piece.

Does the Ripper 2 Piece have a kief catcher?

No. A 2-piece grinder is just the lid and the grinding base, both with teeth, so there is no screen or bottom chamber to collect kief. You grind and take the herb straight from the chamber. If you want to collect kief, the Ripper 4 Piece Medium adds a stainless steel screen and a collection chamber.

What is Resin Repel Technology?

Resin Repel is Santa Cruz Shredder's treatment designed to keep sticky resin from building up inside the grinder, so the lid keeps turning smoothly. It does not replace cleaning. Brush out loose herb after each use and give it an alcohol soak when it starts to feel sticky, and the grinder keeps turning like new.

How big is the medium size?

Santa Cruz Shredder lists the Ripper 2 Piece Medium at 2 1/8 inches in diameter and 1 inch tall. That fits in a pocket and holds enough herb for a joint or a couple of bowls in one grind. For larger batches, the brand's large and jumbo grinders hold more per turn.

Which color should I pick?

All five colors share the same alloy build, teeth, magnet and price. Black and Gunmetal are the low-key options, Silver is the classic metal look, and Gold and Rose Gold stand out on a table. The cast-in branding reads on every color because it is part of the metal rather than printed on top.

How do I clean it?

Brush out loose herb after each use with a soft brush. When resin builds up, separate the two pieces, soak them in isopropyl alcohol for 20 to 30 minutes, scrub the teeth with a soft brush, rinse with warm water and let them dry completely before you close the lid again. Dry threads keep the magnet and turn smooth.

Summary: Alloy instead of aluminum, no kief catcher, Resin Repel helps, 2 1/8 inches across, five colors, easy to clean.

🛒 Complete Your Setup

Add a Santa Cruz Shredder Hemp Bowl Buster, browse the Santa Cruz Shredder Collection, or see every herb grinder we carry.

Summary: Pair the Ripper 2 Piece with a hemp ashtray and the rest of the Santa Cruz Shredder line.

✅ Authentic & Ready to Ship

This is the authentic Santa Cruz Shredder - Ripper 2 Piece Medium Grinder, sold by Angies Boutique at 838 N Broadway, Los Angeles, CA 90012, a smoke shop trading since 1990. Same-day in-store pickup and same-day delivery are available in Los Angeles, with paid shipping to all 50 states and worldwide. Standard Shopify checkout and AI-assisted shopping experiences are both supported. Sold to adults 21 and over only.

Summary: Authentic Santa Cruz Shredder from a Los Angeles shop, available for same-day pickup or delivery in LA and shipping nationwide.