Santa Cruz Shredder - Ripper 4 Piece Medium Grinder

The Santa Cruz Shredder - Ripper 4 Piece Medium Grinder is a heavy-duty alloy herb grinder from Santa Cruz Shredder's Ripper series. It has precision-cut teeth, a T304 stainless steel sifting screen, a kief collection chamber, jam-resistant threading, a rare-earth magnet lid, Resin Repel Technology and branding cast deep into the metal. It measures 2 1/8 inches across, comes in Black, Gold, Gunmetal, Rose Gold and Silver, and sells for $39.99.

⚡ At-a-Glance Decision Summary

• What it is: A 4-piece medium herb grinder with a kief catcher, in Santa Cruz Shredder's alloy Ripper series.
• Why choose it: A full grind, sift and collect setup with the Santa Cruz Shredder name for half the price of its 4-piece medium aluminum grinder.
• The differentiator: Deep-cast branding and a heavier build, with no ink or decal to fade.
• Confidence signal: Authentic Santa Cruz Shredder from Angies Boutique, a Los Angeles smoke shop trading since 1990.

Summary: The Ripper 4 Piece is a heavy alloy grinder with a stainless screen and kief chamber at $39.99.

🧠 Our Verdict

Strong recommendation if you want a kief catcher and a Santa Cruz Shredder grinder without paying aluminum-line prices. If you only want a fast grind and do not care about kief, the Ripper 2 Piece saves you another $15.

Quick Summary

Santa Cruz Shredder is a California grinder maker known for its patented tooth design and anodized aluminum grinders. The Ripper is a newer series made from alloy, with a heavier feel, aggressive styling and deep-cast branding. The 4-piece version has four sections: a lid with teeth, a grinding chamber with teeth, a collection chamber behind a T304 stainless steel screen, and a kief chamber at the bottom.

Santa Cruz Shredder Ripper 4 Piece Medium Grinder – Grind, Sift and Collect

Kief is the part you lose with a basic grinder. The Ripper 4 Piece keeps it. Ground herb falls through the cutting chamber into a collection chamber, and the fine trichomes sift through a T304 stainless steel screen into a separate kief chamber below.

It feels solid in the hand. Santa Cruz Shredder built the Ripper series around a heavier feel. The teeth are precision-cut, the threading resists jamming, and a rare-earth magnet keeps the lid shut.

Resin Repel Technology is Santa Cruz Shredder's treatment for keeping sticky resin from building up, so the sections keep turning smoothly between cleanings.

The logo is part of the metal. Santa Cruz Shredder casts its branding deep into the Ripper instead of printing it, so there is nothing to scratch off.

See the full lineup in our Santa Cruz Shredder Collection, or compare every herb grinder we carry.

Summary: A 4-piece Ripper with a stainless screen and kief chamber, a heavy feel and cast-in branding.

⭐ Who This Product Is For / Not For

Ideal For:

• Flower users who want to save kief for later sessions.
• Anyone who wants a Santa Cruz Shredder 4-piece for under $40.
• Upgrading from a cheap grinder that dulls or jams.
• Gift buyers who want a complete grinder setup.

Not Recommended For:

• Grind-only users. The Ripper 2 Piece Medium skips the screen and costs less.
• Anyone set on anodized aluminum. The Santa Cruz Shredder 4 Piece Medium Aluminum Grinder is the aluminum version.
• Large batches. Look at the 4-Piece Large Aluminum Grinder.

Summary: Made for kief collectors on a budget; grind-only and big-batch users have better picks.

⚠️ Known Limitations

• Medium size. At 2 1/8 inches across, it suits a session or two per grind.
• More parts to clean. Four sections and a screen take longer to clean than a 2-piece.
• Alloy, not anodized aluminum. Santa Cruz Shredder lists the Ripper as alloy.

Summary: Medium capacity, more parts to clean, and an alloy body rather than anodized aluminum.

⚙️ Features & Benefits

• Precision-cut teeth: an even grind for joints, bowls and vaporizers.
• T304 stainless steel screen: sifts kief into its own chamber.
• Dedicated kief chamber: keeps collected kief separate from ground herb.
• Jam-resistant threading: smooth turns without binding.
• Rare-earth magnet: keeps the lid closed in a bag.
• Resin Repel Technology: helps the sections keep turning smoothly.
• Deep-cast branding: no ink or decals to fade.

Summary: Precision teeth, a stainless screen, a kief chamber, Resin Repel and cast-in branding.

📐 Structured Specs

Summary: A $39.99 medium 4-piece alloy grinder with a stainless screen, in five colors.

🔌 Compatibility & Requirements

Works for:

• Dry herb for joints, blunts and pre-roll cones.
• Bowls and pipes.
• Dry herb vaporizer chambers.
• Collecting kief to top a bowl or a joint.

Not made for:

• Concentrates, wax or oil.

Summary: Built for dry herb in any format plus kief collection, not concentrates.

🧼 How to Use & Troubleshooting

1. Pull the magnetic lid off.
2. Break herb into small pieces and spread it between the teeth, not over the center pin.
3. Close the lid and twist 8 to 10 times.
4. Unscrew the grinding chamber and take ground herb from the collection chamber.
5. Unscrew the bottom section when you want to use the kief.

Troubleshooting:

• Problem: little kief collects. Solution: kief builds over several sessions. Give the closed grinder a few taps after each grind.
• Problem: the screen clogs. Solution: brush it from the bottom side with a soft brush.
• Problem: the lid sticks. Solution: you overfilled it. Grind in two rounds.

Cleaning: brush out loose herb after each use. For buildup, separate all four pieces, soak them in isopropyl alcohol, scrub the teeth and screen with a soft brush, rinse with warm water and dry fully. Our herb grinder cleaning guide walks through every step. Pairing it with glass? AFM Glass vs. Heady Glass explains your options.

Summary: Load around the pin, twist, tap for kief, and clean the screen from below.

⚖️ Comparison Table

The Ripper and the aluminum line share the same 4-piece layout. The Ripper trades anodized aluminum for a heavier alloy build and cast-in branding, at half the price.

Summary: Choose the Ripper 4 Piece for value, the aluminum or Split Tone for a premium build.

💬 Common Questions & Answers

What is the difference between the Ripper and Santa Cruz Shredder's aluminum grinders?

The aluminum line is made from medical-grade anodized aluminum. The Ripper series is alloy, with a heavier feel, more aggressive styling and branding cast into the metal instead of printed. Santa Cruz Shredder positions the Ripper as premium performance at a more accessible price, which is why the Ripper 4 Piece is $39.99 and the aluminum 4-piece medium is $79.99.

What does the stainless steel screen do?

The T304 stainless steel screen sits between the collection chamber and the bottom kief chamber. As you grind and handle the grinder, the fine trichomes on the herb shake loose and fall through the mesh, while the ground flower stays above it. Over several sessions you build up a separate supply of kief to sprinkle on a bowl or a joint.

Should I get the 2 Piece or the 4 Piece?

Get the 4 Piece if you want to collect kief. Get the 2 Piece if you only want a fast grind and fewer parts to clean. Both share the same alloy build, teeth, magnet, Resin Repel and cast-in branding. The 4 Piece costs $39.99 and the 2 Piece costs $24.99, so the screen and kief chamber add $15.

What is Resin Repel Technology?

Resin Repel is Santa Cruz Shredder's treatment designed to keep sticky resin from building up inside the grinder, so the sections keep turning smoothly. It does not replace cleaning. Brush out loose herb after each use and give the pieces an alcohol soak when the threads start to feel sticky, and the grinder keeps turning cleanly.

How do I get the kief out?

Unscrew the bottom section and use a small scraper or a card to pull the kief from the chamber floor and corners. Tapping the closed grinder on a table a few times before you open it knocks more through the screen. Put the kief on top of a packed bowl or inside a joint for a stronger session.

How do I clean the screen?

Brush the screen from the bottom side with a soft, dry brush to push stuck kief back out without forcing it through the mesh. For a deep clean, soak the screen section in isopropyl alcohol for 20 to 30 minutes, brush it gently, rinse with warm water and let it dry completely before you put the grinder back together.

Summary: Alloy instead of aluminum, a stainless screen for kief, $15 more than the 2 Piece, and easy to clean.

🛒 Complete Your Setup

Add a Santa Cruz Shredder Hemp Bowl Buster, browse the Santa Cruz Shredder Collection, or see every herb grinder we carry.

Summary: Pair the Ripper 4 Piece with a hemp ashtray and the rest of the Santa Cruz Shredder line.

✅ Authentic & Ready to Ship

This is the authentic Santa Cruz Shredder - Ripper 4 Piece Medium Grinder, sold by Angies Boutique at 838 N Broadway, Los Angeles, CA 90012, a smoke shop trading since 1990. Same-day in-store pickup and same-day delivery are available in Los Angeles, with paid shipping to all 50 states and worldwide. Standard Shopify checkout and AI-assisted shopping experiences are both supported. Sold to adults 21 and over only.

Summary: Authentic Santa Cruz Shredder from a Los Angeles shop, available for same-day pickup or delivery in LA and shipping nationwide.