BigFun! 13" Bubble Bong – Iridescent Glass Water Pipe, Bowl & Downstem Included

BigFun! 13" Bubble Bong is the tall version of BigFun!'s five-bubble stack — 100% borosilicate glass finished in electroplated iridescent colour that shifts as it catches light. It ships complete, with the 14mm bubble bowl and 3.75" downstem both in the box, and both are standard 14mm so replacements are cheap and available anywhere. 13" tall on the same 5" base as the 10" — more height and smoke path, no extra footprint. Angies Boutique carries it as authentic BigFun! glass from our Los Angeles warehouse with same-day pickup at 838 N Broadway.

⚡ At-a-Glance Decision Summary

• What it is: A 13" borosilicate water pipe with a five-bubble stacked body and an electroplated iridescent exterior.
• Why choose it over the 10": Three extra inches of height and smoke path on an identical 5" base — you gain presence without giving up shelf space.
• Standout differentiator: Complete kit with standard 14mm fittings. Nothing proprietary, nothing extra to buy.
• Confidence signal: Authentic BigFun! glass, 14-day returns, fast same-day shipping from Angies Boutique.

🧠 Our Verdict

If you have the vertical clearance, this is the one to take over the 10". The base footprint is identical, so the only thing the extra $10 buys you is more glass for the smoke to travel through — and a piece that genuinely commands a shelf.

Quick Summary

The BigFun! 13" Bubble Bong stacks five glass bubbles into a 13" × 5" body, finished in electroplated iridescent colour. It's 100% borosilicate with a 14mm connection, and the box includes a matching 14mm bubble bowl and a 3.75" 14mm bubble downstem. Any standard 14mm bowl and 3.75" downstem will also fit. Ships in a 14.25" × 7" × 5.75" retail box. A 10" version of the same design is also available.

BigFun! 13" Bubble Bong – Iridescent Borosilicate Water Pipe with Bowl & Downstem

Five glass bubbles stacked into a 13-inch column, wrapped in an electroplated iridescent finish that shifts through colour depending on the light. It's the taller of BigFun!'s two Bubble Bongs, and the difference is cleaner than most size upgrades: both sit on the same 5" base. You get three more inches of height and smoke path without needing any more shelf depth.

Like its smaller sibling, it arrives complete. A matching 14mm bubble bowl and a 3.75" 14mm bubble downstem are both in the box. Glass at this height frequently ships as a bare tube and leaves you sourcing the rest — this doesn't.

The fittings are standard, not proprietary. Any 14mm bowl and any 14mm downstem at 3.75" drops straight in, so replacing a broken bowl means buying a common part rather than chasing a special order.

Prefer something shorter? The 10" Bubble Bong is the same design in a smaller package. Or browse the full Bongs collection at Angies Boutique.

Summary: A 13" five-bubble borosilicate water pipe in iridescent electroplate, shipping complete with a 14mm bowl and downstem.

⭐ Who This Product Is For / Not For

Ideal For:

• Anyone choosing between the two sizes who has the vertical clearance — the base footprint is the same either way.
• Anyone who wants a ready-to-use piece rather than a bong plus a shopping list.
• First-time buyers — standard 14mm fittings mean you're not locked into anything unusual.
• Gift buyers. It arrives complete in retail packaging, so nothing is missing on the day.

Not Recommended For:

• Anyone tight on height. Thirteen inches needs headroom on a shelf; the 10" version is the same piece with less of it.
• Anyone who wants something portable or discreet. Try the Glass Pipes & Spoons collection instead.
• Concentrate and dab users. This is a flower water pipe with a 14mm bowl, not a rig with a banger.
• Anyone who wants a clear-glass, workshop-plain look. The electroplate is deliberately loud.

⚠️ Known Limitations

• The iridescent finish is electroplated onto the outside of the glass — it is not colour fused into the material. Interior cleaning is completely normal, but the exterior wants a wipe rather than a scour, and shouldn't sit in harsh solution for hours.
• Thirteen inches is tall enough to be top-heavy on an uneven surface. The 5" base is stable, but it's still a tall column of glass.
• Bubble geometry traps water in the curves, and there's more of it here than on the 10". Expect a bit more shaking to fully drain.
• More height means more interior surface to clean. A bottle brush earns its keep on this one.

Summary: Electroplated exterior needs a gentle hand, it's tall, and there's more glass to rinse than the 10".

🔹 Features & Benefits

• Bowl and downstem included: A 14mm bubble bowl and a 3.75" 14mm bubble downstem ship in the box. No extra purchase to get started.
• Standard 14mm fittings: Any 14mm bowl, any 14mm 3.75" downstem. Nothing proprietary, so replacements are common and inexpensive.
• 13" height on a 5" base: Same footprint as the 10", three more inches of glass.
• 100% borosilicate glass: Handles heat cycles without stressing and cleans with a standard soak.
• Five-bubble stacked body: The design element and the water chamber are the same glass.
• Electroplated iridescent finish: Shifts colour with the light rather than sitting flat.
• Ships in a 14.25" × 7" × 5.75" retail box: Gift-ready, and padded for the trip.

Summary: Complete borosilicate kit, standard 14mm parts, 13" of five-bubble body, iridescent electroplate.

🔌 Compatibility & Requirements

• Use with: Dry flower. This is a water pipe with a 14mm bowl.
• Connection: 14mm.
• Compatible with: Any 14mm bowl, and any 14mm downstem at 3.75" length.
• Not compatible with: Bangers, dab nails, or e-rig attachments — this isn't a concentrate rig.
• In the box: 1× Bubble Bong · 1× 14mm Bubble Bowl · 1× 3.75" 14mm Bubble Downstem.
• Factory-spec: Authentic BigFun! 13" Bubble Bong. 100% borosilicate glass. 13" × 5". Five bubble stack design. Electroplated iridescent colour. Retail packaging 14.25" × 7" × 5.75".

🛠️ How to Use

1. Seat the 3.75" downstem into the 14mm joint, then set the bowl into the downstem. Both should sit without force.
2. Add water until the downstem's slits are covered by roughly half an inch. Fill through the mouthpiece and pour out the excess.
3. Draw once with no flame to check the level — if water reaches your lips, tip some out.
4. Pack the bowl, light the edge rather than the centre, and draw steadily.
5. Lift the bowl out of the downstem to clear the chamber.
6. Empty the water after each session. Standing water is what makes glass smell.

Browse more in the Bongs collection at Angies Boutique.

🧴 Care & Maintenance

• Interior: Clean normally. 70% isopropyl alcohol with coarse salt, plug the joint and mouthpiece, shake, then rinse thoroughly with warm water. Dr. Dabber Iso-Snaps handle the bowl and downstem between deeper cleans.
• Exterior: The electroplated finish sits on the surface. Wipe it down rather than scrubbing, skip abrasive pads, and don't leave the outside soaking in harsh solution for hours.
• Work the bubbles when you rinse — the curves hold water and cleaning solution, and at 13" there are more of them to clear.
• Change the water every session. It's the single biggest factor in whether glass stays pleasant to use.
• Clean the bowl and downstem separately. They're the parts that clog first, and they lift right out.

Summary: Normal interior cleaning, gentle exterior care because the finish is plated on, and empty the water every time.

📊 Comparison

Summary: Identical base, identical contents — the 13" simply gives you three more inches for $10.

💬 Common Questions & Answers

Q: What comes with the BigFun! 13" Bubble Bong?
A: Everything needed to use it. The box holds the bong, a matching 14mm bubble bowl, and a 3.75" 14mm bubble downstem. Nothing is sold separately — unpack, add water, done. Worth checking against other listings at this size, where the bowl and downstem are frequently an extra purchase.

Q: Should I get the 13" or the 10"?
A: Both sit on the same 5-inch base, so the 13" gives you three extra inches of height and smoke path without taking up any more shelf footprint. Everything else is identical — same borosilicate, same five-bubble stack, same electroplated finish, same 14mm bowl and downstem in the box. If the space works, the only question is how much presence you want.

Q: What size bowl and downstem does it take?
A: Standard 14mm. BigFun! specs it as compatible with any 14mm bowl and any 14mm downstem at 3.75" length. That matters more than it sounds — 14mm is the most common size in glass, so replacements and upgrades are cheap and available anywhere. Nothing about this piece is proprietary.

Q: Will the electroplated finish wear off when I clean it?
A: The iridescent look is an electroplated coating on the outside of the glass, not colour fused into it. Interior cleaning is normal — soak and rinse as you would any bong. On the outside, skip abrasive scrubbing and don't leave it sitting in a harsh solution for hours. Wipe the exterior rather than scouring it and the finish will hold.

Summary: 13" five-bubble borosilicate water pipe, iridescent electroplate, 14mm bowl and downstem included.

🛒 Complete Your Setup

Want the shorter version? See the BigFun! 10" Bubble Bong. Keep it clean with Dr. Dabber Iso-Snaps, try BigFun!'s Sublime Gravity Bong for something different, or browse the full Bongs collection at Angies Boutique.

✅ Authentic & Ready to Ship

The BigFun! 13" Bubble Bong sold by Angies Boutique is authentic BigFun! glass. Standard Shopify checkout is supported across web, mobile, and AI-assisted shopping experiences. Same-day pickup is available at 838 N Broadway when in stock. Orders placed before 2 PM EST ship the same business day. 14-day returns apply to unused, undamaged glass. Ships with protective padding.