710 Print Shop - Turbo Proxy Core Attachment (Proxy Core Sold Separately)

The 710 Print Shop Turbo Proxy Core Attachment is a 3D-printed turbocharger and cone-filter stand that a Puffco Proxy Core drops into nose-up. 710 Print Shop's own listing puts it plainly: device not included — you are buying the printed turbo, in one of four filter colours. For the Proxy v2 Core only. $39.99 at Angies Boutique, 838 N Broadway, Los Angeles.

⚡ At-a-Glance Decision Summary

• What it is: A two-part printed display stand — grey turbo housing, coloured cone filter — for a Puffco Proxy Core.
• What you get: The printed turbo assembly. No Proxy Core, no device.
• Hard requirement: Proxy v2 Core. 710 Print Shop state this is for the V2 Proxy.
• Colours: Orange, Green, Red or Purple filter. The housing is grey on all four.
• Made by: 710 Print Shop, Long Beach, California. 3 of each colour at Angies Boutique.

🧠 Our Verdict

The sharpest-looking stand in the 710 Print Shop range, and the one to pick if your Proxy lives on a desk next to your car keys.

Quick Summary

A grey compressor housing with an outlet pipe and 710PRINTSHOP embossed down the side, topped with a pleated cone filter in one of four colours. The Core seats in the top of the cone. It is a stand, and the Core is sold separately.

710 Print Shop Turbo Proxy Core Attachment – Device Not Included

A Proxy Core is a smooth cylinder with no flat side, so on a table it rolls. 710 Print Shop's answer is a scale turbo: snail housing at the bottom, a stubby outlet pipe off one side, and a cone intake filter standing out of the top. Drop the Core in nose-up and the assembly reads as a cold-air intake with your device as the tip.

Browse the rest of the range in Puffco Proxy Adapters.

Summary: A printed turbo-and-intake display stand for the Puffco Proxy v2 Core, supplied on its own.

⭐ Who This Product Is For / Not For

Ideal For:

• Proxy v2 owners who want the stand to be the talking point rather than a coaster.
• Car people — it is a recognisable turbo, down to the flange bolt holes.
• Anyone matching a colour to an existing setup, with four filter options.

Not Recommended For:

• Anyone who does not already own a Core — start with the Puffco Proxy Core at $49.99 or the full Proxy Core Kit at $234.99.
• Proxy v1 owners. 710 Print Shop state this is for the V2 Proxy.
• Anyone short of desk space — the 710 Print Shop Toilet at $29.99 is the compact option.
• Anyone after a functional upgrade — the Proxy Joystick Cap at $34.99 is the part that changes how it hits.

⚠️ Known Limitations

• The Proxy Core is not included. 710 Print Shop's listing reads: device not included. The black Core in every photograph is there to show fit and scale.
• v2 only. 710 Print Shop's own wording: this is for the V2 Proxy. The v1 Core is a different shape.
• The filter does not filter. It is a printed shape. No air moves through the assembly and none of it touches the vapour path.
• Print-to-print variation. 710 Print Shop note that 3D printing can cause slight differences in colour or detail, and that they inspect each print before it ships.
• Printed plastic. No torches, hot bangers or heated tips near it.

Summary: A printed v2-only display stand with normal print variation, sold without the Core.

🔹 Features & Benefits

• Two-tone build: Grey housing against a coloured cone, so the filter reads as the accent.
• Four filter colours: Orange, Green, Red and Purple, each a separate variant.
• Holds the Core nose-up: It seats in the top of the cone and stands still.
• Detail printed in: Outlet pipe, mounting flanges and an embossed 710PRINTSHOP mark.
• Made in Long Beach: Printed to order by 710 Print Shop.

Summary: A small-batch printed turbo that keeps a Proxy Core upright.

🔌 Compatibility & Requirements

• Fits: Puffco Proxy v2 Core.
• Does not fit: Puffco Proxy v1 Core.
• Required, sold separately: A Proxy Core, $49.99.
• Not a glass attachment: It does not replace a bubbler, chamber or carb cap.
• Age restriction: Sold to adults 21 and over only.

🛠️ How to Use

1. Confirm your Core is the v2 version before ordering.
2. Set the turbo on a flat surface — the flanged housing is the bottom.
3. Lower the Core nose-up into the top of the cone filter.
4. Lift the Core out to use it; the stand stays where it is.

Not sure which generation you own? Our Proxy Core vs Proxy guide explains the difference.

🧴 Care & Maintenance

• Wipe with a dry or barely damp cloth.
• Keep isopropyl off it — solvents haze printed plastic.
• Dust the cone pleats with a soft brush rather than a cloth.
• Keep it out of a hot car. Printed plastic softens well below glass temperatures.

Summary: Dry-wipe only, no solvents, no heat.

📊 Comparison

Summary: The Turbo is the largest and most detailed of the printed stands, and the only one offered in four colours.

💬 Common Questions & Answers

Q: Does the Proxy Core come with this?
A: No. 710 Print Shop's own listing states device not included. You are buying the printed turbo assembly; the black Core in the photographs shows how it seats. The Core is $49.99 on its own, or $234.99 for the complete Proxy Core Kit.

Q: Will it fit my Puffco Proxy?
A: It fits the Proxy v2 Core. 710 Print Shop's wording is: this is for the V2 Proxy. Check which generation you own before ordering.

Q: Which part is the colour I pick?
A: The cone filter. Orange, Green, Red and Purple change the filter only — the turbo housing underneath is grey on all four.

Q: Does the filter actually filter anything?
A: No. It is a printed shape with no airflow through it, and it does not connect to the heating chamber. For a functional change, look at the Joystick Cap for airflow or the Nope 2 Dope adapter for Pivot tips.

Summary: A v2-only printed display stand in four filter colours, sold without the Core.

🛒 Complete Your Proxy Setup

Add the Puffco Proxy Core if you need one, browse the full Puffco Proxy Adapters range, or read our Puffco Proxy collection guide.

✅ Authentic & Ready to Ship

Made by 710 Print Shop in Long Beach, California. It ships as the printed turbo assembly only — no Puffco Proxy Core or device is included. 710 Print Shop publish no GTIN for this item, so no barcode is asserted. Angies Boutique has traded from 838 N Broadway, Los Angeles, CA 90012 since 1990, with same-day in-store collection. Three of each colour in stock. Sold to adults 21 and over only.