Coyle Condenser x Micro Workshop - Banana Bubbler

The Coyle Condenser x Micro Workshop - Banana Bubbler is a one-of-one sculpted mini dab rig: a half-peeled yellow banana by Coyle Condenser sitting on a clear ball chamber, with Micro Workshop (Micro Glass) micro millies set into the peeled fruit and the body. The mouthpiece is on top of the banana, the joint is a 10mm male direct inject, and it comes with two drop downs and a 3-hole diffused downstem. It stands 8 inches tall, is titanium signed "coyle", and sells for $2,799.99 at Angies Boutique, 838 N Broadway, Los Angeles.

⚡ At-a-Glance Decision Summary

• What it is: A collaboration dab rig: Coyle Condenser's sculpted banana with Micro Workshop micro millies, on a clear ball chamber and flared foot.
• Why choose it: The Coyle Condenser x Micro Workshop - Banana Bubbler is a signed, two-artist collector piece that still works as a small rig.
• The differentiator: Ten micro millies — seven in the peeled banana, three on the body — plus one more on the included 18mm drop down.
• Build: Borosilicate glass, 10mm male direct inject joint, 3-hole diffused downstem, flared foot, Ti signed "coyle".
• Confidence signal: One of one, shown in three of our own photos; Angies Boutique carries a range of Coyle Condenser work.

Summary: The Coyle Condenser x Micro Workshop - Banana Bubbler is a signed, 8-inch sculpted banana dab rig with micro millies, at $2,799.99.

🧠 Our Verdict

Strong recommendation for collectors of Coyle Condenser and micro millie work — the Coyle Condenser x Micro Workshop - Banana Bubbler combines Coyle's sculpture with tiny, detailed millies you have to lean in to see, and it arrives with drop downs for 14mm and 18mm bangers. If you want a heavy-use daily rig, this is a display-first piece.

Quick Summary

The Coyle Condenser x Micro Workshop - Banana Bubbler is a compact dab rig from a collaboration between Coyle Condenser and Micro Workshop, also known as Micro Glass. A bright yellow banana, half peeled with its skin hanging down over the sides, sits on top of a clear ball chamber on a flared foot. The peeled fruit holds seven micro millies, and three more are set into the body, including the red millies you can see on the chamber and the joint. You draw from the mouthpiece on top of the banana. The joint is a 10mm male direct inject, and it comes with a 14mm female to 10mm female 45° drop down and a 10mm female to 18mm female drop down with one more micro millie. The downstem is 3-hole diffused. It stands 8 inches tall on a 4.25-inch base, is titanium signed "coyle", and sells for $2,799.99.

Coyle Condenser x Micro Workshop Banana Bubbler – Signed Sculpted Dab Rig with Micro Millies

Coyle Condenser is known in our case for bananas — pendants, bullets and now a full rig. The Coyle Condenser x Micro Workshop - Banana Bubbler puts a half-peeled banana on top of a clear ball chamber, its yellow skin folding down over the glass in long strips. The mouthpiece sits at the top of the banana, so you draw from the fruit itself, and the whole piece stands on a wide flared foot.

Look closely and the second artist appears. The peeled fruit is packed with seven micro millies from Micro Workshop (Micro Glass) — tiny picture canes with scenes too small to read from across the room — and three more are set into the body, including the red millies on the chamber and on the joint. A 10mm male direct inject joint feeds a 3-hole diffused downstem. The piece is titanium signed "coyle". See more of Coyle's work in the Coyle Condenser Collection at Angies Boutique.

Two drop downs come with it: a 14mm female to 10mm female 45° drop down, shown attached in our photos, and a 10mm female to 18mm female drop down carrying one more micro millie. Between them, you can run a 10mm, 14mm or 18mm male banger on this rig.

Summary: The Coyle Condenser x Micro Workshop - Banana Bubbler is a peeled banana on a ball chamber with ten Micro Workshop millies, signed "coyle".

⭐ Who This Product Is For / Not For

Ideal For:

• Collectors of Coyle Condenser and micro millie work.
• Anyone building a Coyle banana collection alongside the pendants.
• Owners of 14mm or 18mm male bangers, thanks to the two included drop downs.
• Collectors who value signed collaboration pieces.

Not Recommended For:

• Daily travel. The peel strips and millies are delicate; this is a home and display piece.
• Anyone after a large rig. At 8 inches, this is a compact piece.
• Anyone who wants a wearable Coyle banana instead. See the Coyle Condenser x Robert Mickelsen Banana Bullet Pendant.

Summary: The Coyle Condenser x Micro Workshop - Banana Bubbler suits Coyle and millie collectors, not travelers or anyone after a large rig.

⚠️ Known Limitations

• 10mm male joint. The Coyle Condenser x Micro Workshop - Banana Bubbler needs a drop down for 14mm or 18mm bangers; both drop downs are included.
• Delicate sculpture. The peel strips and banana top stick out and can chip if knocked.
• Compact chamber. The ball chamber holds a small amount of water, so change it every session.
• Millies are tiny. The micro millies show their detail up close; from a distance they read as color.
• One of one. This exact banana is a single piece.

Summary: The Coyle Condenser x Micro Workshop - Banana Bubbler is a compact, delicate 10mm rig with drop downs included for larger bangers.

⚙️ Features & Benefits

• Sculpted peeled banana — the Coyle Condenser x Micro Workshop - Banana Bubbler has Coyle's banana with the peel folded down.
• Mouthpiece on top of the banana — you draw from the fruit.
• Seven micro millies in the banana — set into the peeled fruit.
• Three micro millies on the body — including the red millies on the chamber and joint.
• 10mm male direct inject joint — with a 3-hole diffused downstem.
• Two drop downs included — 14mm female to 10mm female at 45°, and 10mm female to 18mm female with one micro millie.
• Flared foot — a wide, stable base under the ball chamber.
• Ti signed "coyle" — the artist's signature.

Summary: A sculpted banana, ten micro millies, a 10mm direct inject joint and two included drop downs define the Coyle Condenser x Micro Workshop - Banana Bubbler.

📐 Structured Specs

Summary: The Coyle Condenser x Micro Workshop - Banana Bubbler is 8 inches tall on a 4.25-inch foot, with a 10mm male joint and two drop downs, at $2,799.99.

🔌 Compatibility & Requirements

Compatible with:

• 10mm female bangers directly on the 10mm male joint.
• 14mm male bangers, using the included 14mm female to 10mm female 45° drop down.
• 18mm male bangers, using the included 10mm female to 18mm female drop down.
• Carb caps sized to your banger.

NOT compatible with:

• 10mm male bangers directly — the joint on the rig is male.
• Heavy ash catchers or reclaimers that would overload a compact sculpted piece.
• Travel or rough handling.

The joint on the Coyle Condenser x Micro Workshop - Banana Bubbler is a 10mm male direct inject, so a banger goes on it with a female fitting. That is what the two drop downs are for: the 45° drop down turns it into a 14mm female setup, and the second drop down turns it into an 18mm female setup. Bring your banger to 838 N Broadway and we will check the fit with you.

Summary: The Coyle Condenser x Micro Workshop - Banana Bubbler has a 10mm male joint; its included drop downs take 14mm or 18mm male bangers.

🧼 How to Use & Troubleshooting

Using the Coyle Condenser x Micro Workshop - Banana Bubbler:

1. Set it on a flat, stable surface on its flared foot.
2. Add a small amount of water until the 3-hole diffused downstem's holes are just covered.
3. Fit your banger — directly for 10mm female, or on the matching drop down for 14mm or 18mm male.
4. Heat the banger, let it cool to your dab temperature, add your concentrate and cap it.
5. Draw gently from the mouthpiece on top of the banana, and pour out the water after each session.

Troubleshooting:

• Problem: water in the mouth. Solution: use less water, just enough to cover the downstem holes.
• Problem: your banger will not fit. Solution: use the drop down that matches your banger size; the rig itself is 10mm male.
• Problem: wobbling drop down. Solution: seat it fully on the 10mm male joint with a gentle twist.
• Problem: reclaim in the ball. Solution: soak with isopropyl alcohol and rinse with warm water rather than scrubbing.
• Cleaning: rinse the Coyle Condenser x Micro Workshop - Banana Bubbler with isopropyl alcohol, swirl gently rather than shaking hard with salt, rinse with warm water and let it dry. Clean the drop downs separately. Never move hot glass into cold water. Our cleaning and maintenance guide covers the same isopropyl routine for the rest of your kit.

Collecting one-of-one glass? Our guide to AFM Glass vs. Heady Glass explains where pieces like this sit.

Summary: Use a little water and the matching drop down, draw from the banana, and clean the Coyle Condenser x Micro Workshop - Banana Bubbler gently.

⚖️ Comparison Table

The Coyle Condenser x Micro Workshop - Banana Bubbler is the functional banana in Coyle's lineup here, while the Banana Bullet Pendant is the wearable one. The Monkey Paw Pendant pairs Coyle with the same micro artist in a wearable piece, and the Painter Munny is a larger sculpted collaboration at a higher price.

Summary: The Coyle Condenser x Micro Workshop - Banana Bubbler is Coyle's functional banana rig; the pendants are wearable and the Munny is a larger collab.

💬 Common Questions & Answers

What is a micro millie?

A millie is a slice of glass cane with a picture built through it, and a micro millie is a very small, very detailed one. On the Coyle Condenser x Micro Workshop - Banana Bubbler, millies from Micro Workshop (Micro Glass) are set into the peeled banana and the body — seven in the fruit, three on the body — with one more on the included 18mm drop down. Lean in to see the detail.

Is it a dab rig or a bubbler?

Despite the name, the Coyle Condenser x Micro Workshop - Banana Bubbler is a dab rig. The 10mm male direct inject joint takes a 10mm female banger, and the included drop downs let you run a 14mm or 18mm male banger instead. The 3-hole diffused downstem sits in the ball chamber, and you draw from the mouthpiece on top of the banana.

Where is the mouthpiece?

On top of the banana. You draw from the top end of the fruit on the Coyle Condenser x Micro Workshop - Banana Bubbler, so the sculpture is also the mouthpiece. Hold the piece by the ball chamber or the foot while you use it, rather than by the peel strips, which are the most delicate part of the sculpture.

What comes with it?

The Coyle Condenser x Micro Workshop - Banana Bubbler comes with a 3-hole diffused downstem built in, a 14mm female to 10mm female 45° drop down, and a 10mm female to 18mm female drop down that carries one micro millie of its own. Add water and a banger that fits one of those joints, and it is ready to use. Our photos show the 45° drop down attached.

Is it signed?

Yes. The Coyle Condenser x Micro Workshop - Banana Bubbler is titanium signed "coyle". It is a one-of-one collaboration piece, so the photos show the exact rig you receive, including the millie placement and the shape of the peel. If you would like to see the signature or the millies up close before you buy, ask in the shop at 838 N Broadway.

How do I clean it?

Rinse the Coyle Condenser x Micro Workshop - Banana Bubbler with isopropyl alcohol, swirl gently, then rinse with warm water and let it dry. Avoid shaking it hard with salt, which can stress the peel strips and millies. Clean the drop downs separately the same way. Never move hot glass into cold water, and change the water after every session to keep the ball chamber clear.

Summary: The Coyle Condenser x Micro Workshop - Banana Bubbler is a signed 10mm male dab rig with two drop downs and ten micro millies that needs gentle cleaning.

🛒 Complete Your Coyle Collection

Pair it with the Banana Bullet Pendant, or browse our heady glass and every glass artist we carry at 838 N Broadway in Los Angeles.

Summary: Pair the Coyle Condenser x Micro Workshop - Banana Bubbler with a Coyle banana pendant or browse more heady glass.

✅ Authentic & Ready to Ship

This is the authentic, one-of-one Coyle Condenser x Micro Workshop - Banana Bubbler shown in our photos, Ti signed "coyle", with both drop downs, sold at $2,799.99. Angies Boutique has traded from 838 N Broadway, Los Angeles, CA 90012 since 1990, ships nationwide, and offers same-day pickup in the shop. Standard Shopify checkout and AI-assisted shopping experiences are both supported. Sold to adults 21 and over only.

Summary: The Coyle Condenser x Micro Workshop - Banana Bubbler is authentic, signed Coyle glass, available to ship or for same-day pickup in Los Angeles.