Boro Syndicate - Low Rider Drop Down - 18mm Male - 14mm Female

The Boro Syndicate - Low Rider Drop Down - 18mm Male - 14mm Female is a clear borosilicate drop down adapter that plugs into an 18mm female joint and gives you a 14mm female joint on the other end. That lets you run a 14mm male banger or bowl on an 18mm rig or bong, lower and further from the mouthpiece, while the low-profile Low Rider arm catches reclaim. The arm carries the Boro Syndicate logo. It sells for $39.99.

⚡ At-a-Glance Decision Summary

• What it is: An 18mm male to 14mm female glass drop down in Boro Syndicate's Low Rider shape.
• Why choose it: It does two jobs: it steps an 18mm rig down to 14mm, and it drops your banger lower to keep heat and reclaim away from the neck.
• The differentiator: A reducer and a drop down in one compact piece of glass.
• Confidence signal: Authentic Boro Syndicate glass, sold by Angies Boutique, a Los Angeles smoke shop trading since 1990.

Summary: A Boro Syndicate Low Rider that lets an 18mm rig run 14mm male bangers, lower and cleaner.

🧠 Our Verdict

Strong recommendation if your rig or bong has an 18mm female joint but your bangers and bowls are 14mm male. It saves you from buying a second set of 18mm quartz. If your banger is already 18mm, choose an 18mm Low Rider instead.

Quick Summary

Boro Syndicate makes glass adapters, domes and vapor curves, including Low Rider drop downs in several joint combinations. This one is a size-changer. The 18mm male end goes into your rig's 18mm female joint, and the 14mm female end on the arm takes a 14mm male banger, nail or bowl. The arm runs long and low, so reclaim collects in the glass and your heat source sits away from the mouthpiece.

Boro Syndicate Low Rider Drop Down 18mm Male to 14mm Female – Run 14mm Quartz on an 18mm Rig

Your rig is 18mm. Your quartz is 14mm. This fixes that. 14mm male is a common joint on quartz bangers, terp slurpers and bowls. If your piece has an 18mm female joint, this Low Rider steps it down so those 14mm pieces fit, without a separate reducer.

It drops the banger too. The arm carries your 14mm banger lower and further from the mouthpiece. Heat stays away from your face, and reclaim settles in the arm instead of running into the water. One piece of glass does the job of a reducer and a drop down.

The shape stays low. Boro Syndicate runs the Low Rider arm long and at a shallow angle, so your setup stays compact and steady on the table. It is clear glass with the Boro Syndicate logo on the arm, so you can see when reclaim needs clearing.

See every joint combination in our Boro Syndicate collection, or compare every glass joint adapter and drop down we carry.

Summary: A low, clear drop down that reduces an 18mm female rig to a 14mm female joint for 14mm male quartz.

⭐ Who This Product Is For / Not For

Ideal For:

• Owners of 18mm female rigs or bongs with a collection of 14mm male bangers.
• Anyone who wants 14mm terp slurpers on an 18mm piece.
• Dabbers who want heat further from their face and reclaim out of the water.
• Setups where a tall reducer would make the rig top-heavy.

Not Recommended For:

• 18mm bangers. Choose the Low Rider 18mm Male to 18mm Female.
• 14mm rigs. Choose a 14mm Low Rider such as the 14mm Female to 14mm Female, matched to your rig's joint.
• Female bangers. The arm end is female, so it takes male bangers only.

Summary: Made for 18mm female rigs running 14mm male quartz; other combinations need another Low Rider.

⚠️ Known Limitations

• One joint combination. 18mm male in, 14mm female out.
• Adds a step to cleaning. Reclaim collects in the arm.
• Adds leverage. A heavy banger on a long arm puts weight on your rig's joint.
• Glass breaks. Handle the arm carefully.

Summary: A single fit, one more piece to clean, added leverage, and glass that needs care.

⚙️ Features & Benefits

• 18mm male to 14mm female: runs 14mm male quartz on an 18mm female rig.
• Reducer and drop down in one: no separate adapter needed.
• Low Rider shape: a long, shallow arm for a compact setup.
• Reclaim catch: the arm collects reclaim before it reaches your water.
• Clear borosilicate with logo: Boro Syndicate logo on the arm.

Summary: The Low Rider steps 18mm down to 14mm while lowering heat and catching reclaim.

📐 Structured Specs

Summary: A $39.99 clear glass 18mm male to 14mm female Low Rider drop down.

🔌 Compatibility & Requirements

Compatible with:

• Rigs, bongs and bubblers with an 18mm female joint.
• 14mm male quartz bangers and terp slurpers, like the Toro Terp Slurper 14mm Male.
• 14mm male bowls, like the Ben Wilson 14mm Disc Screen Slide, if you use it for flower.

NOT compatible with:

• 14mm or 10mm female rig joints.
• Female bangers, female domes or 18mm bangers.
• Rigs with a male joint.

Not sure what you have? A male joint slides into another piece; a female joint is the opening that receives it. Match male to female at every connection.

Summary: 18mm female rig in, 14mm male banger or bowl out.

🧼 How to Use & Troubleshooting

1. Confirm your rig has an 18mm female joint and your banger has a 14mm male joint.
2. Seat the 18mm male end of the drop down in the rig.
3. Seat your 14mm male banger or bowl in the 14mm female end.
4. Turn the arm so the banger sits level and steady.
5. Heat and dab, or pack and light, as normal.

Troubleshooting:

• Problem: it wobbles in the rig. Solution: confirm the rig joint is 18mm, not 14mm.
• Problem: the banger sits loose. Solution: confirm the banger is 14mm male, not 10mm.
• Problem: the draw feels restricted. Solution: clean reclaim out of the arm.

Cleaning: let it cool fully. Soak it in isopropyl alcohol with coarse salt, cover the ends and shake, then rinse with warm water. Our cleaning and maintenance guide covers the same alcohol routine, and AFM Glass vs. Heady Glass explains production glass like this.

Summary: 18mm into the rig, 14mm banger into the arm, level it, and clean the reclaim with alcohol and salt.

⚖️ Comparison Table

Every Low Rider shares the shape and price. Match the two ends to your rig and your accessory.

Summary: This is the Low Rider for 14mm quartz on an 18mm rig; the others cover the remaining combinations.

💬 Common Questions & Answers

Can I use 14mm bangers on my 18mm rig with this?

Yes, that is the job it is built for. The 18mm male end seats in your rig's 18mm female joint, and the arm ends in a 14mm female joint that takes any 14mm male banger, terp slurper or bowl. It works as a reducer and a drop down at once, so you skip buying a separate 18mm set of quartz.

What does a drop down add?

Distance and a reclaim catch. The arm lowers your banger and moves it further from the mouthpiece, so heat stays away from your face. It also gives reclaim a stretch of glass to settle in before it reaches the water. The Low Rider shape keeps that extra glass low and compact so the rig stays stable.

Is this the same as a reducer?

It reduces, but it does more. A straight reducer only changes the joint size and keeps the banger in the same spot. This Low Rider changes 18mm to 14mm and also drops the banger lower and further out on an angled arm. If you only need the size change and want the banger to stay close, a straight reducer is the simpler part.

Will it work on a bong for flower?

Yes. On a bong with an 18mm female joint, it lets you use a 14mm male bowl, and the arm keeps ash and resin out of the water. Use a bowl with a built-in screen, such as a disc screen slide, if your flower tends to fall through. Clean the arm more frequently with flower, since ash collects there too.

How do I clean it?

Let it cool, then soak it in isopropyl alcohol with coarse salt, cover both ends and shake. Rinse with warm water and let it dry. If you want to save reclaim, warm the arm gently first so it flows, collect it with a dab tool, then clean the glass fully. The clear glass shows you when buildup is due for a clean.

Which Low Rider do I need?

Check two joints. First, your rig: is the opening 14mm or 18mm, and female? Second, your accessory: is the banger or bowl 14mm or 18mm, and male or female? This one fits an 18mm female rig and a 14mm male accessory. For any other combination, choose the matching Low Rider from our Boro Syndicate collection.

Summary: Runs 14mm male quartz on an 18mm female rig, lowers heat, catches reclaim, works for flower too, and cleans with alcohol and salt.

🛒 Complete Your Setup

Add a 14mm male banger from our quartz banger collection, top it with a cap from our carb cap collection, or browse every dabbing accessory.

Summary: Pair the Low Rider with a 14mm male banger and a carb cap.

✅ Authentic & Ready to Ship

This is the authentic Boro Syndicate - Low Rider Drop Down - 18mm Male - 14mm Female, sold by Angies Boutique at 838 N Broadway, Los Angeles, CA 90012, a smoke shop trading since 1990. Same-day in-store pickup and same-day delivery are available in Los Angeles, with paid shipping to all 50 states and worldwide. Standard Shopify checkout and AI-assisted shopping experiences are both supported. Sold to adults 21 and over only.

Summary: Authentic Boro Syndicate from a Los Angeles shop, available for same-day pickup or delivery in LA and shipping nationwide.