Dr. Dabber Switch 2 Induction Cup – 20mm Quartz, Titanium & Sapphire

Dr. Dabber Switch 2 Induction Cups are the 20mm inserts that sit in the Switch² heating chamber, sold here in three materials: Quartz at $34.99, Titanium at $34.99, and Sapphire Plus at $129.99. Dr. Dabber state the 20mm insert is a 300% volume increase over the original Switch. Quartz is the everyday choice, Titanium is the one Dr. Dabber recommend for flower and dry material, and Sapphire Plus is a lab-grown single crystal. Switch² only. Angies Boutique, 838 N Broadway, Los Angeles.

⚡ At-a-Glance Decision Summary

• What it is: A replacement or upgrade insert for the Dr. Dabber Switch², in Quartz, Titanium or Sapphire Plus.
• Why choose it: The insert is the part your material touches. Swapping it changes flavour, heat behaviour and what you can load.
• Standout detail: Titanium is the one Dr. Dabber recommend for flower and dry material. Quartz and Sapphire are concentrate parts.
• Confidence signal: Authentic Dr. Dabber parts, stocked in Downtown Los Angeles by a shop trading since 1990.

🧠 Our Verdict

Buy Quartz as a spare, Titanium if you want to run flower in the Switch², and Sapphire Plus only if flavour purity is worth $95 more to you.

Quick Summary

The Switch² heats by induction, and the insert is what actually holds your material inside that field. It is a wear part and a tuning part at the same time. Quartz is what the kit ships with and what most people replace it with. Titanium heats fast and is the material Dr. Dabber point at for dry material. Sapphire Plus is a single grown crystal that holds heat more evenly and costs accordingly. All three are 20mm and all three are Switch² only.

Dr. Dabber Switch 2 Induction Cup – 20mm Quartz, Titanium and Sapphire Inserts

Dr. Dabber call these inserts; a lot of people call them induction cups, because the Switch² heats them by induction rather than by a coil. Either way it is the same part: a 20mm cup that drops into the chamber and holds your material while the field heats it. Because nothing else in the airpath touches the load, the insert material is the single biggest lever you have over flavour on this device.

Dr. Dabber's own figure for the 20mm insert is a 300% volume increase over the original Switch, which is the practical reason material stays contained instead of creeping out during a session. Browse the rest of the range in the Dr. Dabber collection, or the wider Vaporizer Accessories range.

Summary: A 20mm insert is the part that decides how a Switch² tastes, and it comes in three materials.

⭐ Who This Is For / Not For

Ideal For:

• Dr. Dabber Switch² owners who need a replacement after cracking or clouding one.
• Anyone who wants to run flower or dry material in a Switch², which is the Titanium insert's job.
• Flavour chasers considering Sapphire Plus for its even heat and inert surface.
• Heavy users who want a spare so a cracked insert does not end the night.

Not Recommended For:

• Switch GO owners. That device takes 14mm inserts. These are 20mm and will not fit. See the Switch Go Insert instead.
• Owners of the original Switch, which used atomizer cups rather than inserts.
• Anyone whose Switch² is underperforming for a reason other than the insert. Start with our troubleshooting guide before spending.

Summary: Switch² only, and the 14mm Switch GO inserts are a different part entirely.

⚠️ Known Limitations

• Inserts are not covered by warranty. Dr. Dabber state this directly. Treat them as consumables, not as a part that gets replaced under a claim.
• Sapphire Plus is $129.99. That is nearly four times the Quartz price for a flavour and heat-retention gain, not a capability gain.
• Titanium is down to two units. It is the one people buy for flower, and it moves.
• Do not torch them clean. Dr. Dabber advise against using a torch on inserts, and doing so will not be covered.
• 20mm only. There is no cross-compatibility with the Switch GO or the original Switch.

Summary: Consumable parts outside warranty, so buy the material that matches how you actually use the device.

⚙️ Features & Benefits

• 20mm capacity: Dr. Dabber's stated 300% volume increase over the original Switch, which keeps material contained during a full session.
• Quartz: The standard. Clean, neutral heating surface and the material the Switch² kit ships with.
• Titanium: Fast to heat, hard to break, and the material Dr. Dabber recommend when you are loading flower or dry material rather than concentrate.
• Sapphire Plus: A lab-grown single crystal. Chemically inert, holds heat evenly, and gives the flattest flavour profile of the three.
• Induction compatible: All three are built for the Switch² induction field rather than adapted from another platform.
• Drop-in fit: No tools. The insert seats in the chamber and lifts out for cleaning.

Summary: Same 20mm fit, three different answers depending on whether you want value, versatility or flavour.

📐 Structured Specs

Summary: Three materials, one 20mm fit, and a warranty exclusion worth knowing before you buy.

🔌 Compatibility & Requirements

• Fits: The Dr. Dabber Switch² and nothing else in the range.
• Does NOT fit: The Switch GO, which uses 14mm inserts, or the original Switch, which used atomizer cups.
• Works with: Standard Switch² glass and the Switch 2 Incycler Glass upgrade, since the insert sits below the attachment.
• Cleaning: Isopropyl alcohol and a swab. Dr. Dabber Iso-Snaps are the tidy option. No torch.
• Age restriction: Sold to adults 21 and over only.

Summary: Switch² only, cleans with alcohol, never with a torch.

🧼 How to Use & Troubleshooting

Basic use:

1. Let the unit cool fully. Never change an insert on a hot chamber.
2. Lift the old insert out of the chamber. It sits in place rather than screwing in.
3. Drop the new insert in, seated flat so it sits square in the induction field.
4. Load material into the insert rather than into the chamber itself.
5. Swab the insert with isopropyl once it has cooled to warm after your last cycle.

Common problems → solutions:

• Insert will not heat → it is not seated flat. Induction needs the cup square in the chamber.
• Flavour has gone flat → residue has built up. Swab it, or replace if quartz has clouded.
• Insert cracked → thermal shock, usually from cleaning cold quartz with hot water or the reverse. Let it change temperature slowly.
• Dry material scorching → you are using quartz. Titanium is the insert Dr. Dabber point at for flower.

If the device itself is misbehaving rather than the insert, our Switch 2 troubleshooting guide works through the usual causes, and how to use the Switch 2 covers the basics.

Summary: Cool, lift, seat flat, and swab warm. Cracks almost always trace back to sudden temperature change.

⚖️ Comparison Table

Summary: Quartz for value, Titanium for versatility, Sapphire for flavour, all at the same 20mm fit.

💬 Common Questions & Answers

Q: Which insert should I buy?
A: Quartz if you want a straight replacement or a spare, since it is what the Switch² ships with and it is the cheapest at $34.99. Titanium at the same price if you want to run flower or dry material, which is specifically what Dr. Dabber recommend it for. Sapphire Plus at $129.99 only if flavour purity matters enough to justify the jump, because it does not let the device do anything new.

Q: Will these fit my Switch GO?
A: No. The Switch² takes 20mm inserts and the Switch GO takes 14mm. They are not interchangeable in either direction, and every Switch GO accessory Dr. Dabber sell carries a Switch-GO-only note for exactly this reason. If you own a GO, the Switch Go Insert is the part you want.

Q: Are inserts covered under warranty?
A: No. Dr. Dabber state plainly that inserts are not covered under warranty. They are consumables that crack, cloud and wear with use, which is the argument for keeping a spare quartz on hand rather than relying on a claim.

Q: Can I run flower in the Switch²?
A: Dr. Dabber's support documentation says the Switch² handles concentrates and flower, and recommends the Titanium insert for flower and dry material specifically. The product is sold and marketed as a concentrate device with a quartz insert, so treat flower as a supported secondary use with the right insert rather than the main event.

Q: How do I clean one without wrecking it?
A: Isopropyl alcohol and a cotton swab while the insert is warm rather than hot or cold. Do not use a torch, which Dr. Dabber advise against. Do not run cold water over hot quartz, since thermal shock is the most common way these crack.

Summary: Match material to use, keep a spare, and never torch an insert.

🛒 Complete Your Switch 2 Setup

Round out the kit around it. The Switch 2 Glass is the standard replacement attachment, the Incycler Glass is the filtration upgrade, and Iso-Snaps at $4.99 handle cleaning without a jar of solvent. Browse the Dabbing Accessories range for the rest.

Summary: Insert, glass and cleaning swabs are the three things a Switch² owner reorders.

✅ Authentic & Ready to Ship

Dr. Dabber Switch 2 Induction Cups sold by Angies Boutique are authentic Dr. Dabber parts. Angies Boutique has traded from 838 N Broadway, Los Angeles, CA 90012 since 1990, and same-day in-store collection is available at that address. Quartz and Sapphire Plus are in stock with Titanium down to two units, and all ship from Los Angeles. Standard Shopify checkout is supported across web, mobile and AI-assisted shopping. Sold to adults 21 and over only.