How to Use the Lookah Seahorse Pro Plus: A Step-by-Step Guide

by vaibhav sharma

The Lookah Seahorse Pro Plus is a versatile and compact electric nectar collector designed for concentrate enthusiasts. It offers a convenient, portable, and powerful way to enjoy your dabs without the hassle of a torch and rig setup. With adjustable temperature settings, a 650mAh battery, and compatibility with 510-thread cartridges, this device is perfect for both beginners and experienced users.

In this guide, we'll walk you through how to use the Lookah Seahorse Pro Plus, from charging and setup to cleaning and maintenance, ensuring you get the best experience every time.

Step 1: Charging the Lookah Seahorse Pro Plus

  1. Connect the USB-C cable to the charging port at the bottom of the device.
  2. Plug the other end into a USB power source (wall adapter, power bank, or computer).
  3. The LED indicator will light up, showing the charging status:
    • Red Light – Charging in progress.
    • Green Light – Fully charged.

⚡ Charging Time: Approx. 1 hour for a full charge.

🔋 Battery Life: Can last 10-15 sessions per full charge, depending on temperature settings.

Step 2: Assembling the Lookah Seahorse Pro Plus

  1. Attach the coil – Screw the quartz or ceramic coil into the threaded opening at the top of the device.
  2. Place the magnetic mouthpiece – This mouthpiece is removable for easy cleaning and allows for a smooth vapor experience.
  3. Optional Water Pipe Adapter – If using a bong, connect the 14/18mm adapter to the mouthpiece for water filtration.

Step 3: Turning On the Device

  1. Press the power button five (5) times quickly to turn on the device.
  2. The LED indicator will flash, signaling that the device is active.

🔹 To Turn Off: Press the power button five (5) times again.

Step 4: Selecting the Temperature Mode

The Lookah Seahorse Pro Plus offers three voltage settings for different vapor experiences:

  • Low (Blue Light) – 3.2V – Best for flavor and light vapor.
  • Medium (Purple Light) – 3.6V – Balanced experience with good flavor and vapor.
  • High (White Light) – 4.1V – Maximum vapor production for strong hits.

How to Change the Voltage Level:

Press the power button three (3) times quickly to cycle through the temperature settings.

Step 5: Using the Lookah Seahorse Pro Plus as a Nectar Collector

The main feature of this device is its ability to function as a nectar collector for dabbing concentrates directly.

Using the Device in Manual Mode (Standard Use)

  1. Prepare your dab – Place a small amount of concentrate on a dab mat or glass dish.
  2. Press and hold the power button to heat the coil.
  3. Wait for the coil to glow (about 2-5 seconds).
  4. Gently touch the coil tip to the concentrate while inhaling through the mouthpiece.
  5. Release the button when done, and exhale the vapor.

🔹 Pro Tip: Move the device in a circular motion for even heating and to avoid burning your wax.

Using the Device in Session Mode (Hands-Free Use)

  1. Press the power button twice (2x) quickly to activate session mode.
  2. The device will heat continuously for 15 seconds without holding the button.
  3. Place the tip on your concentrate and inhale slowly.
  4. The device will automatically stop heating after 15 seconds.

💡 Session mode is great for longer hits and easier dabbing!

Step 6: Using the Lookah Seahorse Pro Plus with 510 Cartridges

Another standout feature of this device is its 510-thread compatibility, allowing it to be used with standard vape cartridges.

How to Attach a 510 Cartridge:

  1. Unscrew the quartz coil and remove it.
  2. Screw in your 510-threaded vape cartridge into the opening.
  3. Press the button to inhale like a regular vape pen.
  4. Adjust the voltage if needed for a smoother or stronger hit.

🔹 Pro Tip: Start at the lowest voltage (3.2V Blue) and increase as needed.

Step 7: Cleaning and Maintenance

To keep your Seahorse Pro Plus in top shape, regular cleaning is essential.

How to Clean the Coil Tip:

  1. After each session, let the coil cool down.
  2. Use a dry brush or cotton swab to wipe off any residue.
  3. For deep cleaning, dip a Q-tip in isopropyl alcohol and clean the coil tip.
  4. Let it dry completely before using it again.

How to Clean the Mouthpiece:

  1. Remove the magnetic mouthpiece.
  2. Rinse it under warm water or soak it in isopropyl alcohol for 10 minutes.
  3. Rinse again with water and let it air dry.

How to Clean the Air Pathway:

  1. Use the included cleaning brush to remove residue from the air pathway.
  2. You can also dip a small brush or cotton swab in isopropyl alcohol and wipe the inside.
  3. Let everything dry before reassembling.

🔹 Pro Tip: Regular cleaning prevents clogs and ensures the best flavor.

Troubleshooting Common Issues

Issue Possible Cause Solution
No Vapor Production Low battery or clogged coil Charge the device, clean the coil
Harsh or Burnt Taste Overheating or old coil Lower temperature, replace coil
Flashing Red Light Battery low Charge the device
Device Not Turning On Battery dead Try a different charger, reset the device
Weak Hits Low voltage or dirty air path Increase voltage, clean air pathway

Final Thoughts: Why Choose the Lookah Seahorse Pro Plus?

✔ Dual Functionality – Use as a nectar collector or 510 cartridge vape
✔ Adjustable Voltage – Three heat settings for the perfect hit
✔ Fast Charging – USB-C for quick and efficient charging
✔ Compact & Portable – Easy to carry anywhere
✔ Water Pipe Compatibility – Connects to bongs and rigs for smoother hits

The Lookah Seahorse Pro Plus is one of the most versatile and user-friendly dab pens on the market. Whether you're new to dabbing or a seasoned enthusiast, this device makes enjoying concentrates easier, smoother, and more efficient.

Back to News
Name Your Own Price!
Name Your Own Price!
Name Your Own Price!