Calibear - Exosphere Glass Attachment for Dr. Dabber Switch 2

The Calibear - Exosphere Glass Attachment for Dr. Dabber Switch 2 is a borosilicate water top for the Dr. Dabber Switch 2 built around a sphere inside a sphere. A colored inner globe sits within a clear outer one, the space between them works as a splash guard, and the perc below breaks vapor into fine bubbles. It comes in Self Striking Red, Tiffany Blue and Lemon Candy at $129.99.

⚡ At-a-Glance Decision Summary

• What it is: A sphere-in-sphere water attachment for the Dr. Dabber Switch 2, made by Calibear Glass.
• Why choose it: It adds color and a built-in splash guard to the Switch 2 in one piece.
• The differentiator: The globe. A colored inner sphere floats inside a clear outer sphere, and you watch the water churn between them.
• Confidence signal: Calibear sells the Exosphere for the Switch 2 at $129.99 on its own site, the same price you pay here.

Summary: Calibear's Exosphere is a colored sphere-in-sphere water top with a splash guard, built only for the Dr. Dabber Switch 2.

🧠 Our Verdict

Strong recommendation if you own a Switch 2 and want a colored top shaped like a small planet. If you want a full recycler loop, the FTK or the Swiss Straight Fab is the better match. If your rig is not a Switch 2, it does not fit.

Quick Summary

Calibear Glass is a California glass company that builds replacement tops for e-rigs like the Dr. Dabber Switch 2, the Dr. Dabber Ghost 2 and the Puffco Pivot. The Exosphere is one of its Switch 2 water attachments. A perc at the base diffuses the vapor, which then rises into a clear outer sphere wrapped around a colored inner sphere. The shape stops splash before it reaches the angled mouthpiece. It replaces the stock Switch 2 glass and works with your existing cups and caps.

Calibear Exosphere Glass Attachment for Dr. Dabber Switch 2 – A Globe Inside a Globe

Look at it before you use it. The Exosphere is named for the outermost layer of a planet's atmosphere, and the shape follows the name. A colored glass sphere sits inside a larger clear sphere. From across the room, it looks like a small planet sitting on top of the Switch 2.

The shape earns its place. When you draw, water and vapor churn inside the outer globe and wrap around the inner one. Water that gets lifted hits the curved walls and falls back down instead of carrying on to your mouth. Calibear calls it a splash-guard effect. Below the globe, a perc breaks the vapor into smaller bubbles first.

Three colors. The color sits on the inner sphere and the mouthpiece lip, so the outer globe stays clear and the color glows through it.

• Self Striking Red: a deep red inner globe and lip.
• Tiffany Blue: a teal blue inner globe and lip.
• Lemon Candy: a bright yellow inner globe and lip.

The same colors run through Calibear's Switch 2 caps, like the Super Mushroom Man Joystick Cap in Tiffany Blue, so a top and cap can match.

See the full Switch 2 range in our Dr. Dabber Collection.

Summary: A Switch 2 water top with a colored inner globe, a clear outer globe that stops splash, and a perc below.

⭐ Who This Product Is For / Not For

Ideal For:

• Switch 2 owners who want color on the top glass.
• Anyone who wants splash protection without a full recycler.
• Calibear collectors matching tops and caps by color.
• Gift buyers shopping for a Dr. Dabber Switch 2 owner.

Not Recommended For:

• Switch Go and original Switch owners. Calibear lists the Exosphere for the Switch 2 only.
• Recycler buyers. The Calibear FTK Recycler keeps water cycling.
• Clear-only setups. The Calibear Swiss Straight Fab is all clear.

Summary: Made for Switch 2 owners who want a colored splash-guard top; not for recycler buyers or other devices.

⚠️ Known Limitations

• Switch 2 only. It does not fit any other e-rig.
• Not a recycler. The water churns in the globe but does not loop through return arms.
• Hard to see inside. The inner sphere blocks part of the view when cleaning.
• Round glass rolls. Set it upright on a flat surface when it is off the base.

Summary: Switch 2 fit only, no recycler loop, a trickier clean, and a shape that needs a flat spot.

⚙️ Features & Benefits

• Sphere-in-sphere design: a colored inner globe inside a clear outer globe.
• Splash-guard effect: curved walls send lifted water back down.
• Base perc: diffuses vapor before it reaches the globe.
• Colored inner globe and lip: Self Striking Red, Tiffany Blue or Lemon Candy.
• Angled mouthpiece: a comfortable draw over the Switch 2.
• Switch 2 fit: replaces the stock glass, no adapter.

Summary: The Exosphere pairs a perc and a splash-guard globe with color in three options.

📐 Structured Specs

Summary: A $129.99 sphere-in-sphere Switch 2 top in three colors.

🔌 Compatibility & Requirements

Compatible with:

• The Dr. Dabber Switch 2.
• Switch 2 cups, including the Switch 2 Induction Cup.
• Switch 2 caps like the Calibear Facet Opal Joystick Cap.

NOT compatible with:

• The Dr. Dabber Switch Go or the original Switch.
• The Dr. Dabber Ghost 2.
• Puffco, Focus V or any other e-rig.
• Glass rigs with a ground joint.

The Exosphere replaces the top glass only. Your Switch 2 base, cup and cap stay the same.

Summary: Fits the Dr. Dabber Switch 2 with its cups and caps, and nothing else.

🧼 How to Use & Troubleshooting

1. Lift the stock glass off the Switch 2.
2. Add water until the perc sits just under the line.
3. Set the Exosphere on the base and take a test pull with no heat.
4. Adjust the water until it churns in the globe without reaching the mouthpiece.
5. Load the cup, cap it, start the heat cycle and draw steadily.

Troubleshooting:

• Problem: water reaches the mouthpiece. Solution: pour some out. The globe stops splash, not an overfill.
• Problem: the draw feels tight. Solution: lower the water slightly and clean the perc.
• Problem: it will not seat. Solution: confirm the rig is a Switch 2.

Cleaning: only once the glass is cool. Fill with isopropyl alcohol and coarse salt, cover the openings, and roll the piece gently so the mix reaches the gap around the inner sphere. Rinse with warm water and check against a light. Hot glass into cold water cracks it. Our cleaning and maintenance guide covers the same routine.

Wondering how production glass compares with artist work? Read AFM Glass vs. Heady Glass.

Summary: Fill to just over the perc, test it cold, and roll alcohol and salt around the inner globe to clean.

⚖️ Comparison Table

The Exosphere and the Torus both bring color. The Torus recycles the water. The Exosphere wraps it in a globe and stops splash.

Summary: Choose the Exosphere for color and a splash-guard globe, or the Torus for color with recycling.

💬 Common Questions & Answers

What does sphere-in-sphere mean?

The Calibear Exosphere has a colored glass globe sitting inside a larger clear glass globe. Vapor rises from the perc into the space between them, and the water churns around the inner sphere as you draw. The curved outer wall catches water that gets lifted and sends it back down, which is how the shape works as a splash guard.

Will the Exosphere fit my Switch Go?

No. Calibear makes the Exosphere Glass Attachment for the Dr. Dabber Switch 2 only. The Switch Go and the original Switch use different glass and a different base, so it will not seat on them. On a Switch 2, it drops on in place of the stock glass with no adapter and works with your existing cups and caps.

Is the Exosphere a recycler?

No. A recycler sends water out through a loop and back again. The Exosphere keeps the water inside its outer globe, where it churns around the inner sphere and falls back down. That gives you splash control and diffusion without return arms. If you want a true recycler on a Switch 2, look at the Calibear FTK or Swiss Straight Fab.

Which color should I pick?

All three Exosphere tops share the same shape, perc, fit and $129.99 price. Only the inner sphere and mouthpiece lip change color: Self Striking Red is a deep red, Tiffany Blue is teal blue and Lemon Candy is bright yellow. Calibear uses the same colors in its Switch 2 caps, so match the top to the cap you own.

How much water does it need?

Enough to cover the perc at the base. Add water a little at a time, set the Exosphere on the Switch 2 and take a test pull with the heater off. When the water churns in the globe without climbing into the mouthpiece, the level is right. Overfilling defeats the splash guard, so start low and add.

How do I clean around the inner sphere?

Let the Exosphere cool completely. Pour in isopropyl alcohol with coarse salt, cover the openings and roll the piece slowly so the mix travels around the gap between the two spheres. Rinse with warm water, hold it up to a light to check, and repeat if needed. Never run hot glass under cold water, because the temperature shock cracks it.

Summary: A colored globe in a clear globe, Switch 2 only, splash control without recycling, three colors, low fill, rolled clean.

🛒 Complete Your Switch 2 Setup

Match it with the Calibear Super Mushroom Man Joystick Cap, add a pack of Iso-Snaps, or browse every vaporizer accessory we carry.

Summary: Pair the Exosphere with a matching Calibear cap and cleaning swabs.

✅ Authentic & Ready to Ship

This is the authentic Calibear - Exosphere Glass Attachment for Dr. Dabber Switch 2, sold by Angies Boutique at 838 N Broadway, Los Angeles, CA 90012, a smoke shop trading since 1990. Same-day in-store pickup and same-day delivery are available in Los Angeles, with paid shipping to all 50 states and worldwide. Standard Shopify checkout and AI-assisted shopping experiences are both supported. Sold to adults 21 and over only.

Summary: Authentic Calibear glass from a Los Angeles shop, available for same-day pickup or delivery in LA and shipping nationwide.