Calibear Torus Incycler Glass Attachment for Dr. Dabber Switch 2 Purple

Calibear - Torus Incycler Glass Attachment for Dr. Dabber Switch 2 Purple

Precio habitual$114.99
/
Los gastos de envío se calculan en la pantalla de pagos.

🔥 17 people viewed this today
  • Stock bajo - quedan 1 artículo
  • Pedido pendiente, envío pronto
  • Distribuidor autorizado
  • Devoluciones fáciles en 14 días

The Calibear - Torus Incycler Glass Attachment for Dr. Dabber Switch 2 Purple is a thick borosilicate incycler top that replaces the stock glass on a Dr. Dabber Switch 2. Water climbs from the base into a purple ring-shaped chamber and drains back down a side arm, so the same water keeps moving through every draw. It sells for $114.99.

⚡ At-a-Glance Decision Summary

  • What it is: An incycler water attachment for the Dr. Dabber Switch 2, made by Calibear Glass.
  • Why choose it: An incycler keeps water circulating instead of sitting still, which cools the vapor more than a single-stage top.
  • The differentiator: The torus. The inner chamber is a purple glass ring, and you can watch the water loop through it on every pull.
  • Confidence signal: Calibear sells the Switch 2 Torus Incycler at $114.99 on its own site, the same price you pay here.

Summary: Calibear's Torus Incycler is a purple-accented, recycling water top built only for the Dr. Dabber Switch 2.

🧠 Our Verdict

Strong recommendation if you own a Switch 2 and want recycling water without paying for the factory incycler. It costs twenty dollars less than the Dr. Dabber version and adds color. If you own a Switch Go, look elsewhere: Calibear makes a separate torus top for that rig.

Quick Summary

Calibear Glass is a California glass company that builds replacement tops for e-rigs like the Dr. Dabber Switch 2, the Dr. Dabber Ghost 2 and the Puffco Pivot. The Torus Incycler is one of its Switch 2 water attachments. A perc at the bottom breaks up the vapor, a purple ring-shaped chamber above it pushes water upward, and a side arm returns that water to the base. It drops onto the Switch 2 in place of the stock glass and uses the cups and caps you already own.

Calibear Torus Incycler Glass Attachment for Dr. Dabber Switch 2 Purple – Moving Water for the Switch 2

Still water only does so much. On a standard top, vapor bubbles through a pool and the pool stays put. An incycler changes that. Each draw lifts water out of the base, carries it up through a chamber, and lets it fall back down a separate arm. The water you pull through on the second hit is the water that just finished the first loop.

Here the chamber is a torus, a glass ring shape, and it is purple. It sits in the middle of an otherwise clear body, so the color frames the water as it moves. Below it, a perc splits the vapor into smaller bubbles before the loop starts. Above it, a purple-lipped mouthpiece finishes the piece.

Calibear builds this top in thick glass, and it shows in the hand. It is a heavier, sturdier piece than the factory Switch 2 Glass, which matters on a top you lift off and set back down every session.

Do not mix it up with its sibling. Calibear also makes a Torus Incycler for the Switch Go. That one has a different base and will not fit a Switch 2. This listing is the Switch 2 version.

Shop the Switch 2 range in our Dr. Dabber Collection, or start with the Dr. Dabber Switch 2 itself.

Summary: A thick-glass Switch 2 incycler with a purple torus chamber that keeps water looping through every draw.

⭐ Who This Product Is For / Not For

Ideal For:

  • Switch 2 owners who want recycling water for smoother, cooler hits.
  • Anyone shopping the factory incycler who wants color and a lower price.
  • People who like watching the water work.
  • Calibear collectors building a set of Switch 2 tops.

Not Recommended For:

  • Switch Go owners. This is the Switch 2 version. Calibear's Switch Go torus is a different piece.
  • Anyone who wants clear glass only. The Calibear Curve Flow Sidecar (Clear) has no color at all.
  • People who rush their pulls. Incyclers reward a steady draw.

Summary: Made for Switch 2 owners who want moving water and color; not for Switch Go owners or clear-only buyers.

⚠️ Known Limitations

  • Switch 2 only. It will not seat on the Switch Go, the original Switch or any other e-rig.
  • Water level matters. Too little and the loop will not start. Too much and water reaches the mouthpiece.
  • More glass to clean. The ring, the perc and the side arm all collect residue, so it takes longer to clean than a single-stage top.
  • It is glass. Thick, but the side arm still breaks if it hits something hard.

Summary: Switch 2 fit only, a water level you need to dial in, and glass that needs a soft landing.

⚙️ Features & Benefits

  • Incycler function: water loops up through the chamber and back down a side arm on every draw.
  • Purple torus chamber: the ring-shaped chamber gives the water a path and gives the piece its color.
  • Base perc: breaks vapor into smaller bubbles before the loop.
  • Thick borosilicate: a heavier build than factory glass.
  • Purple mouthpiece lip: ties the top of the piece to the chamber color.
  • Switch 2 fit: replaces the stock glass with no adapter.

Summary: The Torus Incycler pairs a looping water path and a base perc with thick glass and purple accents.

📐 Structured Specs

Product Calibear - Torus Incycler Glass Attachment for Dr. Dabber Switch 2 Purple
Brand Calibear Glass (Jurupa Valley, California)
Type Incycler water attachment for an e-rig
Fits Dr. Dabber Switch 2 only
Function Incycler with base perc and torus chamber
Material Thick borosilicate glass
Color Clear body with purple chamber and mouthpiece lip
SKU CALIBEAR-TORUS-INCYCLER-SWITCH-2-PURPLE
Price $114.99

Summary: A $114.99 purple torus incycler in thick glass, made for the Switch 2.

🔌 Compatibility & Requirements

Compatible with:

NOT compatible with:

  • The Dr. Dabber Switch Go or the original Switch.
  • The Dr. Dabber Ghost 2.
  • Puffco, Focus V or any other e-rig.
  • Glass rigs with a ground joint.

The Torus Incycler replaces the top glass only. Your Switch 2 base, cup and cap stay the same.

Summary: Fits the Dr. Dabber Switch 2 with its cups and caps, and nothing else.

🧼 How to Use & Troubleshooting

  1. Lift the stock glass off the Switch 2.
  2. Add water through the mouthpiece a little at a time.
  3. Set the Torus Incycler on the base and take a test pull without heat. Watch the water rise into the ring and fall down the side arm.
  4. Adjust the water until it loops without reaching the mouthpiece.
  5. Load the cup, cap it, start the heat cycle, and draw at a steady pace.

Troubleshooting:

  • Problem: the water does not loop. Solution: add a little more water, then test again.
  • Problem: water reaches your mouth. Solution: pour some out and slow your pull.
  • Problem: the draw feels tight. Solution: clean the base perc and the side arm.
  • Problem: it will not seat. Solution: confirm the rig is a Switch 2 and not a Switch Go.

Cleaning: only once the glass is cool. Fill it with isopropyl alcohol and coarse salt, cover the openings, shake so the salt runs through the ring and the arm, then rinse with warm water. Hot glass into cold water cracks it. Our cleaning and maintenance guide walks through the same alcohol routine.

Curious how production glass compares with artist work? Read AFM Glass vs. Heady Glass.

Summary: Dial in the water with a cold test pull, draw steady, and clean the Torus Incycler cold with alcohol and salt.

⚖️ Comparison Table

Switch 2 top Price Design Pick it for
Calibear Torus Incycler (Purple) $114.99 Incycler, purple torus chamber Recycling water with color
Dr. Dabber Switch 2 Incycler Glass $134.99 Factory incycler, clear Dr. Dabber's own recycling top
Calibear FTK Recycler $119.99 Spiral recycler, clear A sculptural recycler look
Dr. Dabber Switch 2 Glass $79.99 Factory single-stage top A spare stock top

Both incyclers here do the same job. The Calibear version costs less and brings purple to the setup. The factory version keeps everything Dr. Dabber.

Summary: Choose the Torus Incycler for color and price, or the factory incycler to stay all Dr. Dabber.

💬 Common Questions & Answers

What is an incycler, and how is it different from a recycler?

Both keep water moving instead of sitting in one pool. On the Calibear Torus Incycler, the loop runs inside the body of the piece: water rises through the purple torus chamber and drops back down a side arm into the base. A classic recycler routes that return through external arms instead. Either way, the moving water cools the vapor more than a single still chamber does.

Will the Torus Incycler fit my Switch Go?

No. This is the Switch 2 version. Calibear makes a separate Fab Torus Incycler for the Switch Go with a different base, and the two are not interchangeable. If you own a Switch Go, shop the top made for that rig. On a Switch 2, this incycler replaces the stock glass directly with no adapter.

How much water does it need?

Enough for the loop to start and not so much that it reaches the mouthpiece. Add water a little at a time, set the Torus Incycler on the Switch 2, and take a test pull with the heater off. When the water climbs into the purple ring and falls back down the side arm without splashing up, the level is right.

Is this better than the Dr. Dabber Switch 2 Incycler Glass?

It does the same job differently. The factory Switch 2 Incycler Glass is clear and sells for $134.99. The Calibear Torus Incycler adds a purple torus chamber and a thick-glass build at $114.99. Both recycle water on the Switch 2. Pick the Calibear for color and price, and the factory top if you want every part to be Dr. Dabber.

Does it come in other colors?

Calibear makes the Switch 2 Torus Incycler in several chamber colors. The one we carry is purple: a clear body with a purple torus chamber and a purple mouthpiece lip. The function, fit and price stay the same across the range, so the color is the only decision. If purple matches the rest of your glass, this is the one.

How do I clean an incycler?

Let the Torus Incycler cool fully. Pour in isopropyl alcohol with coarse salt, cover the openings, and shake so the mix runs through the ring, the perc and the side arm. Rinse with warm water and let it dry. Never run hot glass under cold water, because the temperature shock cracks borosilicate. Regular cleaning keeps the water path open so the loop starts easily.

Summary: A Switch 2 incycler with an internal loop, set up with a cold test pull, and cleaned cold with alcohol and salt.

🛒 Complete Your Switch 2 Setup

Add a pack of Iso-Snaps for wiping the cup between sessions, keep a spare Switch 2 Induction Cup on hand, or browse every vaporizer accessory we carry.

Summary: Pair the Torus Incycler with cleaning swabs, a spare cup and a Switch 2 cap.

✅ Authentic & Ready to Ship

This is the authentic Calibear - Torus Incycler Glass Attachment for Dr. Dabber Switch 2 Purple, sold by Angies Boutique at 838 N Broadway, Los Angeles, CA 90012, a smoke shop trading since 1990. Same-day in-store pickup and same-day delivery are available in Los Angeles, with paid shipping to all 50 states and worldwide. Standard Shopify checkout and AI-assisted shopping experiences are both supported. Sold to adults 21 and over only.

Summary: Authentic Calibear glass from a Los Angeles shop, available for same-day pickup or delivery in LA and shipping nationwide.

Envío gratuito en pedidos superiores a $50

Devoluciones en 30 días: ¿No está satisfecho? Devuélvalo dentro de 30 días para obtener un reembolso completo. Los artículos deben estar sin usar y en su embalaje original.

Procesamiento rápido: ¡ Los pedidos realizados antes de las 2 p. m. EST se envían el mismo día!

Embalaje discreto: todos los pedidos se envían en un embalaje sencillo para su privacidad.

También te puede interesar

Preguntas frecuentes


Visto recientemente