Storz & Bickel Volcano Hybrid Starter Set – Balloons, Filling Chamber & Tube Kit

The Storz & Bickel Volcano Hybrid Starter Set is the accessory kit made for the Volcano Hybrid, covering both ways the Hybrid works: balloons and the inhalation tube. Inside are three Easy Valve balloons with mouthpieces, one Easy Valve balloon with adapter, a Hybrid filling chamber with cap ring, normal screen set and cleaning brush, and a tube kit. Volcano Classic and Digit owners need the Easy Valve Starter Set instead. $133.99 at Angies Boutique.

⚡ At-a-Glance Decision Summary

• What it is: Storz & Bickel's Starter Set for the Volcano Hybrid (S&B part 11 30): balloons, filling chamber and tube kit in one box.
• Volcano Hybrid owners: this is the set to buy when you need a full replacement kit or a second set of everything.
• Volcano Classic or Digit owners: buy the Easy Valve Starter Set. Storz & Bickel lists this set for the Hybrid only.
• Only need balloons? The Easy Valve Replacement Set (standard or XL) fits the Hybrid too.
• Confidence signal: genuine Storz & Bickel parts at $133.99, under the maker's own $134.90 list price.

Summary: The full balloon and tube kit for the Volcano Hybrid; Classic and Digit owners take the Easy Valve Starter Set.

🧠 Our Verdict

Strong recommendation for a Volcano Hybrid owner who needs a new filling chamber, a fresh tube kit and balloons in one order. If your chamber and tube are fine and you only want balloons, the Easy Valve Replacement Set costs less.

Quick Summary

The Volcano Hybrid can be used two ways. In balloon mode, hot air passes through the filling chamber and fills an Easy Valve balloon that you inhale from away from the device. In tube mode, you draw straight from the filling chamber through a silicone tube while the fan runs. Storz & Bickel built this starter set to cover both: the Hybrid filling chamber, the balloons, and the tube kit. Storz & Bickel describes the Easy Valve balloon and the silicone tube as food-safe, heat-resistant and tasteless.

Storz & Bickel Volcano Hybrid Starter Set – Balloon and Tube in One Kit

The Hybrid earns its name from two ways of inhaling, and this kit carries the parts for both. Most Volcano accessory sets are built around the balloon. The Hybrid Starter Set adds the tube kit, so the same box covers a slow balloon session at the couch and a direct draw at the table.

The filling chamber is the Hybrid version. Storz & Bickel sells a separate filling chamber for the Volcano Hybrid and lists this starter set for the Hybrid only. The chamber here comes with its cap ring, a normal screen set of approximately 30 mm and a cleaning brush, so it is ready to fill out of the box.

The balloons are Easy Valve. Three arrive ready to use with their mouthpieces. The fourth is the Easy Valve balloon with adapter, which Storz & Bickel designs for reuse and for attaching your own length of balloon tube.

Shop every Volcano device and part we carry in the Storz & Bickel collection.

Summary: A Hybrid filling chamber, four Easy Valve balloons and a tube kit, covering both of the Volcano Hybrid's inhalation modes.

⭐ Who This Product Is For / Not For

Ideal For:

• Volcano Hybrid owners who want a complete replacement kit after heavy use.
• Hybrid owners who want a second filling chamber and tube kit to keep loads ready.
• Anyone who bought a Hybrid without its accessories and needs the full set.

Not Recommended For:

• Volcano Classic and Volcano Digit owners. Buy the Easy Valve Starter Set.
• Hybrid owners who only need balloons. The Easy Valve Replacement Set is six balloons without a chamber or tube.
• Portable vaporizer owners. These parts fit the Volcano Hybrid only.

Summary: Built for Volcano Hybrid owners who need the whole kit; Classic, Digit and balloon-only buyers have their own sets.

⚠️ Known Limitations

• Volcano Hybrid only. Storz & Bickel lists this set for the Hybrid. The Classic and Digit use the Easy Valve Starter Set.
• Standard balloons only. The balloons here are the standard Easy Valve size. XL balloons come in the XL Replacement Set.
• Three ready-to-use balloons. This set has three balloons with mouthpiece plus the adapter balloon; the Classic and Digit starter set has four plus the adapter balloon.
• No balloon tube roll included. The balloon with adapter takes a separate length of balloon tube when you rebuild it.
• Accessory kit only. No Volcano base, no grinder, no herb.

Summary: A Hybrid-only kit with standard balloons; XL balloons and spare balloon tube are sold separately.

⚙️ Features & Benefits

• Two inhalation modes in one box: balloons for sessions away from the device, a tube kit for drawing direct.
• Hybrid filling chamber: the chamber Storz & Bickel makes for the Volcano Hybrid, with cap ring, screens and brush.
• Self-sealing Easy Valve mouthpieces: each balloon closes when it comes off the chamber.
• Food-safe materials: Storz & Bickel describes the Easy Valve balloon and silicone tube as food-safe, heat-resistant and tasteless.
• Reusable adapter balloon: designed for reuse and for fitting your own balloon tube.
• Cleaning brush included: for clearing the chamber and screens between sessions.

Summary: Balloon and tube modes, a Hybrid filling chamber, self-sealing balloons, food-safe materials and a cleaning brush.

📐 Structured Specs

Summary: S&B part 11 30: four Easy Valve balloons, a Hybrid filling chamber with cap ring, screens and brush, and a tube kit.

🔌 Compatibility & Requirements

Which Volcano do you have?

• Volcano Hybrid: this set fits. See the Volcano Hybrid.
• Volcano Classic or Digit: this set does not fit. Buy the Easy Valve Starter Set for the Volcano Classic or the Classic Gold Edition.

Refills later: balloons for the Hybrid come from the Easy Valve Replacement Set, in Standard (approx. 60 cm) or XL (approx. 90 cm). Storz & Bickel lists both sizes for the Hybrid, Classic and Digit.

Summary: Hybrid: yes. Classic, Classic Gold and Digit: use the Easy Valve Starter Set. Balloons later: the Replacement Set.

🧼 How to Use & Troubleshooting

1. Grind your herb with a grinder such as the Storz & Bickel Herb Mill XL.
2. Fill the Hybrid filling chamber and close it with the screens and cap ring in place.
3. Set the temperature on the Hybrid and fit the filling chamber once it is ready.
4. Balloon mode: clip an Easy Valve balloon onto the chamber, run the fan until it fills, switch the fan off and lift the balloon away. The valve seals it.
5. Tube mode: fit the tube kit to the chamber, run the fan and draw through the mouthpiece.

Troubleshooting:

• Problem: herb gets into the balloon or tube. Solution: check the screens are seated and intact, and grind slightly coarser.
• Problem: weak airflow. Solution: clear the screens with the cleaning brush and check the chamber sits flat.
• Problem: the chamber does not fit your Volcano. Solution: confirm the model; Classic and Digit parts are different.

Cleaning: brush out the chamber and screens after each session, and rinse the silicone tube per the Volcano Hybrid manual. Our cleaning guide covers the grinder side of the routine, and AFM Glass vs. Heady Glass is worth a read if you collect glass too.

Summary: Fill, heat, then pick balloon or tube; keep the screens clean for strong airflow.

⚖️ Comparison Table

Summary: Hybrid Starter Set for a full Hybrid kit, Easy Valve Starter Set for the Classic or Digit, Replacement Set for balloons only.

💬 Common Questions & Answers

Does the Storz & Bickel Volcano Hybrid Starter Set fit the Volcano Classic?

No. Storz & Bickel lists this set for the Volcano Hybrid only, and the Hybrid uses its own filling chamber, sold separately by the maker as the Filling Chamber for Volcano Hybrid. Volcano Classic and Volcano Digit owners, including Classic Gold Edition owners, should buy the Easy Valve Starter Set, which carries the Classic and Digit filling chamber with five balloons.

What comes in the box?

Three Easy Valve balloons with mouthpiece, one Easy Valve balloon with adapter, one filling chamber, and one tube kit. The filling chamber comes with one cap ring, one normal screen set of approximately 30 mm and one cleaning brush. There is no Volcano base, no grinder and no roll of balloon tube in the set, so plan for those separately if you need them.

Why does the Hybrid set include a tube kit?

Because the Volcano Hybrid can be used with balloons or with a tube. In tube mode you draw directly from the filling chamber while the fan runs, without filling a balloon first. Storz & Bickel includes the tube kit so the set covers both modes. The maker describes the silicone tube as food-safe, heat-resistant and tasteless, the same terms it uses for the Easy Valve balloon.

What is the difference between this set and the Easy Valve Replacement Set?

The Hybrid Starter Set is the full kit: filling chamber, cap ring, screens, brush, tube kit and four balloons. The Easy Valve Replacement Set is six balloons and nothing else, in Standard or XL. Buy the starter set when you need a new chamber or tube kit. Buy the Replacement Set when the chamber and tube are fine and you only want fresh balloons for the Hybrid.

Can I use XL balloons on the Volcano Hybrid?

Yes. Storz & Bickel lists the Easy Valve XL Replacement Set for the Volcano Hybrid as well as the Classic and Digit. XL balloons measure approximately 90 cm against approximately 60 cm for the standard balloons in this starter set, and they clip onto the same Easy Valve filling chamber. Pick XL when you want a longer balloon on each fill.

How do I keep the chamber and tube working well?

Brush the filling chamber and screens after each session with the included brush so fine herb does not clog the screens. Grind to a medium consistency so pieces stay in the chamber. Clean the silicone tube following the Volcano Hybrid instructions, and replace balloons when the material turns cloudy or stiff. Clean screens keep fills fast in both balloon and tube mode.

Summary: Hybrid only, a full chamber kit with four balloons and a tube kit, both inhalation modes covered, XL balloons fit, and clean screens keep it fast.

🛒 Complete Your Volcano Hybrid Setup

Add the Herb Mill XL grinder for an even grind, and an Easy Valve Replacement Set so spare balloons are on hand. More parts are in Vaporizer Accessories.

Summary: Pair the Hybrid Starter Set with a grinder and spare balloons for an uninterrupted routine.

✅ Authentic & Ready to Ship

This is the authentic Storz & Bickel Volcano Hybrid Starter Set, sold by Angies Boutique at 838 N Broadway, Los Angeles, CA 90012, a smoke shop trading since 1990. Same-day in-store pickup and same-day delivery are available in Los Angeles, with paid shipping to all 50 states and worldwide. Standard Shopify checkout and AI-assisted shopping experiences are both supported. Sold to adults 21 and over only.

Summary: Authentic Storz & Bickel from a Los Angeles shop, with same-day pickup or delivery in LA and shipping nationwide.