Storz & Bickel Volcano Easy Valve Replacement Set – 6 Balloons, Standard or XL

The Storz & Bickel Volcano Easy Valve Replacement Set is six ready-to-use Easy Valve balloons with mouthpieces, in two sizes: Standard (approx. 60 cm, $58.99) and XL (approx. 90 cm, $68.99). Storz & Bickel lists both for the Volcano Hybrid, Volcano Classic and Volcano Digit. It is balloons only: no filling chamber. If you need the chamber too, buy the Easy Valve Starter Set (Classic, Digit) or the Volcano Hybrid Starter Set.

⚡ At-a-Glance Decision Summary

• What it is: six Storz & Bickel Easy Valve balloons with mouthpieces, ready to clip on and fill.
• Standard or XL: Standard balloons are approx. 60 cm (S&B part 05 01 E). XL balloons are approx. 90 cm (S&B part 05 02 E).
• Fits: Volcano Hybrid, Volcano Classic and Volcano Digit, on the Easy Valve system.
• Not included: a filling chamber. You need one from a starter set or from your Volcano's original kit.
• Confidence signal: genuine Storz & Bickel balloons at $58.99 and $68.99, under the maker's own $59 and $69 list prices.

Summary: Six Easy Valve balloons in Standard or XL for every current Volcano; bring your own filling chamber.

🧠 Our Verdict

Strong recommendation for any Volcano owner whose filling chamber is fine and whose balloons are cloudy, stiff or running low. Pick Standard to match the balloons that came with your Volcano, or XL for a longer balloon on each fill. Skip it if you are missing the filling chamber; a starter set is the right buy then.

Quick Summary

Volcano balloons are a consumable. Each one fills, empties and fills again, and over time the material clouds and stiffens. The Easy Valve Replacement Set is how Storz & Bickel sells the refill: six balloons with the Easy Valve mouthpiece already fitted, so they are ready to use out of the pack. The valve in each mouthpiece closes when you lift the balloon off the filling chamber and keeps the vapor in until you inhale. Storz & Bickel lists the set for the Volcano Hybrid, Classic and Digit, in Standard and XL.

Storz & Bickel Volcano Easy Valve Replacement Set – Standard or XL Balloons

The balloon is the part of a Volcano you replace most, so the refill should be simple. This set is exactly that: six balloons, mouthpieces fitted, nothing to assemble. Clip one on, fill it, use it, and swap to the next when it wears.

Standard is the original size. The Standard balloons measure approximately 60 cm, the regular Easy Valve size that Storz & Bickel puts in its starter sets.

XL is the longer balloon. The XL balloons measure approximately 90 cm and clip onto the same Easy Valve filling chamber. Choose XL when you want a longer balloon per fill, for example when you share a session.

One set fits every current Volcano. Storz & Bickel lists both sizes for the Volcano Hybrid, Volcano Classic and Volcano Digit, so Hybrid and Classic owners buy the same refill.

Shop every Volcano device and part we carry in the Storz & Bickel collection.

Summary: Six ready-to-use Easy Valve balloons in Standard (approx. 60 cm) or XL (approx. 90 cm) for the Hybrid, Classic and Digit.

⭐ Who This Product Is For / Not For

Ideal For:

• Volcano Hybrid, Classic and Digit owners whose balloons have clouded or stiffened.
• Owners who want XL balloons on a filling chamber they already have.
• Anyone who wants spare balloons ready so a session never waits on a refill.

Not Recommended For:

• Owners without a filling chamber. Buy the Easy Valve Starter Set for a Classic or Digit, or the Volcano Hybrid Starter Set for a Hybrid.
• Solid Valve users. These are Easy Valve balloons. The Solid Valve system uses different parts.
• Portable vaporizer owners. These balloons are made for the Volcano desktop line.

Summary: For Volcano owners with a working Easy Valve chamber; no-chamber and Solid Valve owners need other parts.

⚠️ Known Limitations

• Balloons only. No filling chamber, screens, clips or tube kit.
• Easy Valve only. Storz & Bickel lists the set for the Easy Valve system, not Solid Valve.
• Consumable. Balloons wear with use and are meant to be replaced.
• Size is per set. Each set is all Standard or all XL; there is no mixed pack.

Summary: Six Easy Valve balloons of one size, with no chamber; replace them as they wear.

⚙️ Features & Benefits

• Ready to use: each balloon arrives with its Easy Valve mouthpiece fitted.
• Self-sealing valve: the mouthpiece closes when the balloon comes off the chamber.
• Two sizes: Standard approx. 60 cm or XL approx. 90 cm.
• Every current Volcano: listed by Storz & Bickel for the Hybrid, Classic and Digit.
• Food-safe material: Storz & Bickel describes its Easy Valve balloons as food-safe, heat-proof and odor-free.
• Six per pack: enough to rotate balloons through several sessions.

Summary: Six ready balloons with self-sealing mouthpieces, in Standard or XL, for every current Volcano.

📐 Structured Specs

Summary: Six Easy Valve balloons, Standard (05 01 E, approx. 60 cm) or XL (05 02 E, approx. 90 cm), for the Hybrid, Classic and Digit.

🔌 Compatibility & Requirements

Which Volcano do you have?

• Volcano Hybrid: both sizes fit.
• Volcano Classic and Classic Gold Edition: both sizes fit.
• Volcano Digit: both sizes fit.

Required: an Easy Valve filling chamber. If you do not have one, the starter set for your model includes it: the Easy Valve Starter Set for the Classic and Digit, the Volcano Hybrid Starter Set for the Hybrid.

Summary: Hybrid, Classic, Classic Gold and Digit all take both sizes, as long as you have an Easy Valve filling chamber.

🧼 How to Use & Troubleshooting

1. Load and heat your filling chamber as usual. A grinder such as the Storz & Bickel Herb Mill XL keeps the grind even.
2. Take a balloon from the pack and clip its mouthpiece onto the filling chamber.
3. Run the fan until the balloon is full, then switch it off.
4. Lift the balloon away. The valve closes on its own.
5. Inhale from the mouthpiece at your own pace.

Troubleshooting:

• Problem: the balloon will not clip on. Solution: check you have an Easy Valve chamber, not a Solid Valve one.
• Problem: the balloon loses vapor after lifting. Solution: check the mouthpiece is fully seated in the balloon; replace the balloon if the material is torn.
• Problem: the balloon fills slowly. Solution: clear the filling chamber screens and check the chamber sits flat on the air outlet.

Care: keep spare balloons in their packaging until use and swap any balloon that clouds or stiffens. Our cleaning guide covers the grinder side of the routine, and AFM Glass vs. Heady Glass is worth a read if you collect glass too.

Summary: Clip on, fill, lift and inhale; replace balloons as they wear and keep the chamber screens clean.

⚖️ Comparison Table

Summary: Replacement Set for balloons only, in Standard or XL; a starter set when you also need the chamber.

💬 Common Questions & Answers

Does the Storz & Bickel Volcano Easy Valve Replacement Set fit the Volcano Hybrid?

Yes. Storz & Bickel lists both the Standard and XL Easy Valve Replacement Sets for the Volcano Hybrid, Volcano Classic and Volcano Digit. The balloons clip onto the Easy Valve filling chamber, so any of those three models with an Easy Valve chamber takes them. Hybrid and Classic owners buy the same refill, which makes it simple to restock.

What is the difference between Standard and XL?

Length and price. Standard balloons measure approximately 60 cm and cost $58.99 for six. XL balloons measure approximately 90 cm and cost $68.99 for six. Both have the same Easy Valve mouthpiece and clip onto the same filling chamber. Pick Standard to match the balloons from your starter kit, or XL when you want a longer balloon on each fill.

Does this set include a filling chamber?

No. The Easy Valve Replacement Set is six balloons with mouthpieces and nothing else. You need an Easy Valve filling chamber, which comes with your Volcano's starter kit. If yours is lost or damaged, buy the Easy Valve Starter Set for a Classic or Digit, or the Volcano Hybrid Starter Set for a Hybrid. Both include the chamber plus balloons.

Do these balloons work with the Solid Valve system?

No. These are Easy Valve balloons, and Storz & Bickel lists them for the Easy Valve system. The Solid Valve system is a separate Storz & Bickel setup with its own parts. If your Volcano uses Solid Valve, you either buy Solid Valve parts or switch to Easy Valve with a starter set, which includes the Easy Valve filling chamber.

When should I replace my Volcano balloons?

Replace a balloon when the material turns cloudy, feels stiff, or no longer holds vapor after you lift it off the chamber. Balloons are a consumable part of the Volcano system and wear with use. Having a six-pack on hand means a worn balloon never holds up a session. Keep unused balloons sealed in their packaging until you need them.

Are the mouthpieces already attached?

Yes. Storz & Bickel describes the set as ready-to-use balloons, and each one ships with its Easy Valve mouthpiece in place. There is nothing to assemble: take a balloon from the pack, clip the mouthpiece onto the filling chamber and run the fan. The valve in the mouthpiece seals the balloon when you lift it away.

Summary: Fits the Hybrid, Classic and Digit, Standard is approx. 60 cm and XL approx. 90 cm, no chamber included, Easy Valve only, replace worn balloons, mouthpieces come fitted.

🛒 Complete Your Volcano Setup

Need the chamber as well? Pick the Easy Valve Starter Set or the Volcano Hybrid Starter Set. Browse more parts in Vaporizer Accessories.

Summary: Add a starter set if you need the chamber; otherwise six balloons keep your Volcano running.

✅ Authentic & Ready to Ship

This is the authentic Storz & Bickel Volcano Easy Valve Replacement Set, sold by Angies Boutique at 838 N Broadway, Los Angeles, CA 90012, a smoke shop trading since 1990. Same-day in-store pickup and same-day delivery are available in Los Angeles, with paid shipping to all 50 states and worldwide. Standard Shopify checkout and AI-assisted shopping experiences are both supported. Sold to adults 21 and over only.

Summary: Authentic Storz & Bickel from a Los Angeles shop, with same-day pickup or delivery in LA and shipping nationwide.