Hemper That 70's Peak Top – Lava Lamp Glass for Puffco Peak

The Hemper That 70's Peak Top is a glass attachment that replaces the stock glass on a Puffco Peak, built as a retro lava lamp silhouette with colourful detailing. Hemper state the fitment twice: it is designed for the Puffco Peak and Peak Pro, and their Peak tops are universally compatible with all Puffco Peak models. It is glass only — no device, battery, chamber or carb cap. Angies Boutique lists it at $79.99, matching Hemper's own price.

⚡ At-a-Glance Decision Summary

• What it is: A replacement glass top for the Puffco Peak, shaped as a retro lava lamp.
• Fitment stated twice by Hemper — "designed for the Puffco Peak and Peak Pro", and "universally compatible with all Puffco Peak models".
• Does not fit: Puffco Proxy, Proxy Core or Pivot.
• The lamp is the shape. Hemper describe a lava lamp silhouette with colourful details — a formed profile rather than a printed wrap.
• Glass only. No base, battery, heating chamber or carb cap in the box.
• Hemper publish no dimensions — no height, no percolator type, no material grade. The specs table says so.
• Shipped weight 13 oz — the only measurement Hemper give.

🧠 Our Verdict

Buy the That 70's Peak Top if you own a Puffco Peak and want the lava lamp on it. The fitment is settled — Hemper say it two different ways and we have confirmed it on the piece in our shop — and the shape is a genuine match for the theme rather than a sticker applied to a generic top. What Hemper do not give is a single dimension or a percolator specification, and the page says so rather than filling the gap. If a published spec sheet is what decides it for you, the Chinese Takeout Peak Top is the one that has one.

Quick Summary

The Hemper That 70's Peak Top is a glass attachment for the Puffco Peak, shaped as a retro lava lamp with colourful detailing. It fits the original Peak, the Peak Pro and the New Peak as a direct swap with no adapter, and does not fit the Proxy or Pivot. It is glass only — no device included. Hemper publish no height, percolator specification or material grade for this piece. $79.99 at Angies Boutique in Los Angeles.

Hemper That 70's Peak Top – Lava Lamp Glass for Puffco Peak & Peak Pro

A lava lamp is one of the few shapes that genuinely belongs on top of a Peak. The stock attachment is already a tapered glass column with something moving inside it — the silhouette is halfway there before anyone starts designing.

Hemper lean on that. Their copy describes a retro lava lamp silhouette with colourful details, which is a formed profile rather than artwork printed onto a generic top. And they close the question that actually stops these purchases: the piece is designed for the Puffco Peak and Peak Pro, and separately, HEMPER Puffco Peak tops are universally compatible with all Puffco Peak models. We have confirmed the same on the piece in our shop — every Peak generation uses the same glass fitment, old and new. Browse the range in our Puffco Peak glass attachments collection.

Summary: The Hemper That 70's Peak Top is a lava-lamp-shaped glass attachment that fits every Puffco Peak generation as a direct swap.

⭐ Who This Product Is For / Not For

Ideal for:

• Puffco Peak owners who want the rig to look like theirs rather than stock.
• Anyone who wants the fitment question closed before ordering — Hemper state it two separate ways.
• People who like that the shape does the work rather than a printed graphic.
• Anyone running the theme alongside the That 70's Lamp XL Bong.
• Owners who want a second top so the rig keeps working while the other one soaks.

Not recommended for:

• Anyone who does not own a Puffco Peak. This is glass only and does nothing on its own — the That 70's Lamp XL Bong runs the same theme and needs no device.
• Puffco Proxy, Proxy Core or Pivot owners. Different device, different glass, no adapter path.
• Buyers who want a stated height or percolator design. Hemper publish neither — the Chinese Takeout Peak Top is the one with a full spec sheet.
• Anyone expecting a performance upgrade over the stock Peak glass. Hemper make no such claim.

Summary: This suits Peak owners buying on design and fitment confidence, and it does not suit Proxy owners or anyone who needs published specifications.

⚠️ Known Limitations

• You need a Puffco Peak already. This is the most common mistake with Peak tops. It is a replacement glass attachment, not a device — no base, battery, chamber or carb cap. Without a Peak underneath it there is nothing to attach it to.
• Hemper publish no specifications for this piece. No height, no width, no percolator type, no material grade. Their listing is a product description and nothing else.
• No performance claim. Hemper describe "smooth function and far-out flair" and stop there. They do not claim it beats the stock Peak glass, and neither do we. Treat the change as cosmetic.
• The bong's double percolator does not apply here. The That 70's Lamp XL Bong publishes an inline-to-lava-dome double perc. This is a different product and Hemper publish no percolation for it at all.
• It does not fit the Proxy, Proxy Core or Pivot. Those are different devices with different glass.
• Glass in a shaped form. Store it where it will not get knocked, and let the device cool before swapping tops.

Summary: The trade-offs are that it needs a Peak, Hemper publish no specifications, and the bong's percolator specs do not carry over.

⚙️ Features & Benefits

• Fitment stated twice — the most valuable thing on this listing. Hemper describe it as designed for the Puffco Peak and Peak Pro, and separately state their Peak tops are universally compatible with all Puffco Peak models. Original Peak, Peak Pro and New Peak share the same glass fitment.
• Direct swap — the stock attachment lifts straight off and this one seats in its place. Nothing threads, nothing needs tools, no adapter.
• Retro lava lamp silhouette — Hemper's own description. The shape is formed glass rather than a graphic applied to a generic top, and a lava lamp is one of the few themes that genuinely suits a Peak's tapered column.
• Colourful detailing — the finish that completes the 70s look, in Hemper's wording.
• A second top keeps the rig running — owning two attachments means the Peak never sits idle while one is soaking. A practical reason to buy even for someone happy with their current glass.
• Everything above and below it stays as it was — this changes the glass only, so your existing carb cap and atomizer carry on unchanged.

Summary: Fitment confirmed two ways, a formed lava lamp shape, and a direct swap with no adapter.

📐 Structured Specs

Summary: Fitment, design and weight are what Hemper publish; height, percolation and material grade are not stated.

🔌 Compatibility & Requirements

Works with:

• Puffco Peak — the original model.
• Puffco Peak Pro, including the Puffco Peak Pro Smart E-Rig.
• Puffco New Peak.
• Standard Peak carb caps and atomizers — this changes the glass only.
• Water, at the level you normally run in the stock attachment.

Not compatible with:

• Puffco Proxy and Proxy Core.
• Puffco Pivot.
• Non-Puffco e-rigs.
• Dry flower — this is a concentrate attachment on a concentrate device.

Required to use: a Puffco Peak of any generation. Nothing else, and no adapter purchase. Our guide to the difference between the Puffco Peak and Peak Pro covers what else changes between the models, though the glass fitment is the same either way.

Summary: It fits every Puffco Peak generation with no adapter and fits no other device.

🧼 How to Use & Troubleshooting

Fitting and running it:

1. Power the Peak down and let it cool completely before touching the glass.
2. Lift the stock attachment straight off. Nothing unscrews and nothing is threaded.
3. Fill the That 70's Peak Top with water to the same level you run in the stock glass.
4. Seat it on the device and press down until it is flush. It is a friction fit — no adapter, no tools.
5. Run the device exactly as you did before. Nothing about the workflow changes.

Cleaning: pour the water out after every session. Clean the interior with isopropyl alcohol and coarse salt, working it through the chamber, then rinse thoroughly with warm water. Hemper publish no exterior construction detail for this piece — they describe colourful details without saying whether the colour is in the glass or applied to it — so treat the outside as printed and wipe it with a damp cloth rather than soaking the whole attachment. That approach is correct either way. Our deep cleaning guide for the Puffco Peak Pro covers the rest of the device.

Troubleshooting:

• Problem: the attachment sits loose. Solution: check the seat is clear of residue and press it down flush. All Peak generations share this fitment, so a poor seat is debris rather than a mismatch.
• Problem: water pulls toward the mouthpiece. Solution: overfilled. Empty some out and retest with a dry pull.
• Problem: you are unsure how much water to use. Solution: match the level you ran in the stock glass. Hemper publish no fill line for this piece.
• Problem: flavour has gone flat. Solution: change the water. Standing water dulls flavour faster than residue does.
• Problem: the exterior colour is dulling. Solution: it has been soaked. Move to interior-only cleaning from here.

Summary: Seat it flush, match your usual water level, and keep alcohol on the inside.

⚖️ Comparison Table

Every Hemper top on this shelf costs $79.99 and fits the same devices, so the choice comes down to which one you want to look at. Where they differ on paper is how much Hemper chose to publish: the Chinese Takeout is the one with a full spec sheet including its percolator design. What this one has is a shape that suits the device rather than being applied to it, and a fitment statement written twice. If you are weighing several, our review of the Puffco Peak replacement glass attachment works through the question.

Same theme, different job: the That 70's Lamp XL Bong at $119.99 is the flower piece, needs no device, and does publish its percolation — a double perc, inline into lava dome.

Summary: All four cost the same and fit the same rigs; this one is bought on shape and fitment rather than published specifications.

💬 Common Questions & Answers

Does the That 70's Peak Top fit my Puffco Peak?
Yes, whichever Peak you own. Hemper state it two separate ways on this listing — that it is "designed for the Puffco Peak and Peak Pro", and that "HEMPER Puffco Peak tops are universally compatible with all Puffco Peak models". We have confirmed the same on the physical piece: the original Peak, the Peak Pro and the New Peak all use the same glass fitment. There is no adapter and no model number to check. It does not fit the Puffco Proxy, the Proxy Core or the Pivot.

How tall is it?
Hemper do not publish a height for this piece, so we are not going to state one. Their listing carries a product description and no specification block. If a stated height matters, the Hemper Chinese Takeout Peak Top is published at 5.3 inches and the Gummy Bear at 5.4, both at the same $79.99.

Does it have a percolator?
Hemper do not say. They publish no percolator specification for this piece. It is worth being explicit that the That 70's Lamp XL Bong does publish a double percolator — an inline into a lava dome — but that is a different product and its specification does not transfer to this attachment.

Is the lava lamp printed on, or is it the shape?
Hemper describe a "retro lava lamp silhouette with colorful details", which is a shape claim — the profile of the glass is the lamp. They do not state whether the colour is worked into the glass or applied to the surface, so we treat the exterior as printed for cleaning purposes, which is the safe approach either way.

Is a Puffco Peak included?
No. This is a glass attachment only. There is no base, battery, heating chamber or carb cap in the box, and it does nothing on its own. Anyone who wants the 70s design without owning a Peak should buy the Hemper That 70's Lamp XL Bong at $119.99 instead, which needs no device.

Why buy a second Peak top?
Because glass that is soaking is glass you cannot use. Owning two attachments means the rig stays in service while one is being cleaned, and cleaning stops being the thing that ends a session.

Is it an upgrade over the stock Puffco glass?
Hemper make no such claim and neither do we. Without a published percolator specification there is nothing to compare against the stock attachment. Buy it because you want the lava lamp on your rig, and expect the filtration you already had.

Summary: Fitment is confirmed two ways, the lamp is the shape of the glass, and height and percolation are not published.

🛒 Complete Your Setup

A Peak attachment holds residue in places a cloth will not reach, and swapping tops regularly is easier when cleaning is quick. Dr. Dabber Iso-Snaps handle interior clean-ups between full cleans without putting the exterior finish near alcohol.

Anyone building the theme out should look at the That 70's Lamp XL Bong for flower, and our guide on choosing from a premium smoke shop is a useful starting point if you are comparing several pieces. The full range sits in dabbing and Hemper. Everything ships from our Los Angeles shop, and local orders are ready for same-day pickup at 838 N Broadway.

Summary: Cleaning swabs and the matching 70's XL bong are the sensible pairings with this Peak top.

✅ Authentic & Ready to Ship

Every Hemper That 70's Peak Top sold by Angies Boutique is authentic Hemper glass, priced at $79.99 — the same figure Hemper list on their own storefront. Angies Boutique is a licensed Los Angeles smoke shop at 838 N Broadway, Los Angeles, CA 90012, trading since 1990. Checkout works through standard Shopify checkout and through AI-assisted shopping experiences without extra steps, and in-stock orders are ready for same-day collection at the shop. Live availability on this page reflects the shelf.

Summary: Authentic Hemper glass at the manufacturer's own price, available for Los Angeles pickup.