Pelican 1150 Case
- Stock bajo - quedan 3 artículos
- Pedido pendiente, envío pronto
- Distribuidor autorizado
- Devoluciones fáciles en 14 días
The Pelican 1150 Case is a small waterproof hard case that protects cameras, phones, GPS units and other compact gear from water, dust and impact. The Pelican 1150 Case is rated IP67, which means it is dust-tight and survives immersion in water up to one meter deep for 30 minutes. An O-ring seal, an automatic pressure equalization valve and a polypropylene shell make the Pelican 1150 Case a heavy duty dry box for travel, boating and fieldwork. Angies Boutique in Los Angeles sells the Pelican 1150 Case with Pick N Pluck foam in a range of colors.
⚡ At-a-Glance Decision Summary
- What it is: A compact, waterproof, crushproof hard case from Pelican's Protector line, with customizable foam inside.
- Why choose it: The Pelican 1150 Case keeps small, expensive gear dry and intact on a boat, in a checked bag, or at the bottom of a backpack.
- Standout differentiator: IP67 protection plus an automatic pressure equalization valve, so the lid opens easily after a flight or a change in altitude.
- Interior size: 8.29" x 5.79" x 3.75", sized for a phone, an action camera, a GPS unit or a small hard drive.
- Confidence signal: Genuine Pelican, made in the USA, backed by Pelican's Lifetime Guarantee of Excellence.
Summary: The Pelican 1150 is a small, heavy duty waterproof case for anyone who carries compact gear into water, dust or rough handling.
🧠 Our Verdict
The Pelican 1150 Case is a strong recommendation if you want a pocket-sized waterproof hard case that seals out water and dust and survives being dropped, crushed or packed under heavier luggage.
Quick Summary
Pelican has built protective cases since 1976, and the 1150 is one of the smallest cases in the Protector line. The Pelican 1150 Case uses a polypropylene shell with an open cell core and solid wall design, a polymer O-ring seal, stainless steel hinge pins and a double-throw latch. Inside, pre-scored Pick N Pluck foam tears away to fit the exact shape of your gear. The result is a waterproof dry box that keeps cameras, phones and electronics safe on the water, on the trail and in transit.
Pelican 1150 Case: Waterproof, Crushproof Protection for Small Gear
Small gear is easy to lose to a single bad moment: a phone that slides off a boat seat, a camera that rides in the bottom of a duffel under 40 pounds of luggage, a GPS unit left in the rain. The Pelican 1150 Case is designed for people who want those moments to stop mattering. The 1150 seals with an O-ring so water and dust stay out, the polypropylene shell resists crushing and impact, and the foam holds each item in place so nothing rattles. The Pelican 1150 Case is small enough to fit inside a carry-on or a backpack, which makes it a practical choice for protecting equipment during travel. Browse every hard case we carry in the Protective Cases Collection at Angies Boutique.
Summary: The Pelican 1150 Protector Case turns a backpack, boat or suitcase into a safe place for small, valuable equipment.
⭐ Who This Product Is For / Not For
Ideal For:
- Boaters, kayakers and anglers who need a waterproof case for a phone, keys, a wallet or a GPS unit.
- Travelers who want to protect a camera, hard drive or small electronics in a checked bag or carry-on.
- Photographers carrying a pocket camera, an action camera, spare batteries and memory cards.
- Hikers, campers and field workers who need a dustproof, heavy duty dry box for small tools and devices.
Not Recommended For:
- Anyone carrying a full-size DSLR with a lens attached. Step up to the larger Pelican 1200 Case.
- Laptops, tablets or long items. The Pelican 1150 interior is 8.29 inches long.
- Buyers who want a soft, flexible pouch. The Pelican 1150 is a rigid hard case.
Summary: The Pelican 1150 suits anyone protecting small gear from water and impact, and the larger Pelican cases suit bigger equipment.
⚠️ Known Limitations
- The interior is compact. At 8.29" x 5.79" x 3.75", the Pelican 1150 Case holds a phone, an action camera or a GPS unit comfortably, and a larger camera body does not fit.
- Plucked foam is permanent. Each foam cube you remove stays removed. Plan the layout before you pluck, or buy a replacement foam set when your gear changes.
- The seal depends on a clean O-ring. Sand, hair or grit on the O-ring breaks the watertight seal, so wipe the O-ring and the lid channel before closing the case near water.
Summary: The Pelican 1150 waterproof case trades interior space for portability, and the seal stays reliable when the O-ring stays clean.
⚙️ Features & Benefits
- IP67 waterproof seal: The polymer O-ring keeps water and dust out, so the Pelican 1150 Case protects gear on a boat deck, in the rain or in a dusty truck bed.
- Automatic pressure equalization valve: The valve balances air pressure inside the case after altitude changes, so the lid opens easily after a flight while water stays out.
- Crushproof polypropylene shell: The open cell core with solid wall design keeps the Pelican 1150 strong and light, so it rides under heavier luggage without collapsing.
- Pick N Pluck foam: Pre-scored foam cubes pull out by hand to create a custom cutout for each item, and convoluted lid foam presses everything in place.
- Double-throw latch: The latch opens with one easy motion and closes tight, so the case stays shut when it gets bumped or dropped.
- Stainless steel hardware: Stainless steel hinge pins resist corrosion from salt water and humidity.
- Padlock hole: A padlock hole lets you lock the Pelican 1150 Case for travel or storage.
- Wide temperature range: Pelican rates the 1150 for use from -40°F to 210°F.
Summary: A sealed O-ring, a pressure valve and a crushproof shell are what make the Pelican 1150 a true heavy duty waterproof case.
📐 Structured Specs
| Product | Pelican 1150 Protector Case with foam |
| Brand | Pelican |
| Type | Waterproof hard case / dry box |
| Interior (L x W x D) | 8.29" x 5.79" x 3.75" (21.1 x 14.7 x 9.5 cm) |
| Exterior (L x W x D) | 9.44" x 7.80" x 4.29" (24 x 19.8 x 10.9 cm) |
| Lid depth | 0.75" (1.9 cm) |
| Body and latch material | Polypropylene |
| Seal | Polymer O-ring |
| Hinge pins | Stainless steel |
| Interior | Pick N Pluck foam with convoluted lid foam |
| Rating | IP67, Def Stan 81-41 |
| Pressure valve | Automatic pressure equalization valve |
| Temperature range | -40°F to 210°F |
| Made in | USA |
| Guarantee | Pelican Lifetime Guarantee of Excellence |
Summary: The Pelican 1150 is an IP67 polypropylene hard case with an 8.29 by 5.79 by 3.75 inch interior and customizable foam.
🔌 Compatibility & Requirements
Fits well:
- Smartphones, pocket-size digital cameras and action cameras.
- GPS units, small radios, portable hard drives, memory cards and spare batteries.
- Keys, a wallet, a passport and other small items you need to keep dry.
Does not fit:
- Full-size DSLR or mirrorless bodies with a lens attached.
- Tablets, laptops or anything longer than 8.29 inches.
Requirements: No tools needed. Pluck the foam by hand to fit your gear, and keep the O-ring clean for a watertight seal.
Summary: The Pelican 1150 fits phones, action cameras and small electronics, and larger Pelican cases fit bigger gear.
🧼 How to Use & Troubleshooting
Setting up the Pelican 1150 Case:
- Lay your gear on top of the Pick N Pluck foam and trace the outline of each item.
- Pull out the foam cubes inside each outline, a few at a time, until each item sits snug.
- Leave at least an inch of foam between your gear and the walls of the case for impact protection.
- Wipe the O-ring and the lid channel, close the lid, and press the latch until it locks.
Troubleshooting:
- Problem: water got inside. Solution: check the O-ring for sand, hair or a twist, clean it, and seat it evenly in its groove before closing.
- Problem: the lid is hard to open. Solution: the purge valve equalizes pressure on its own after altitude changes. Give it a moment, then open the latch.
- Problem: gear rattles inside. Solution: the cutouts are too large. Add a replacement foam layer or pack a soft cloth into the gap.
Summary: Pluck the foam to fit, keep the O-ring clean, and the Pelican 1150 waterproof case stays sealed trip after trip.
⚖️ Comparison Table
| Case | Interior (L x W x D) | Best For |
| Pelican 1120 Case | 7.3" x 4.8" x 3.3" | A phone, keys and cards |
| Pelican 1150 Case | 8.29" x 5.79" x 3.75" | Action cameras, GPS units, small electronics |
| Pelican 1200 Case | 9.3" x 7.1" x 4.1" | Compact cameras and larger accessories |
All three cases share the same Pelican Protector construction: an IP67 O-ring seal, an automatic pressure equalization valve, a crushproof polypropylene shell and Pick N Pluck foam. The difference is interior space. The Pelican 1150 Case sits in the middle, with room for a phone and a camera together while still fitting inside a carry-on or backpack.
Summary: The Pelican 1150 is the mid-size choice among small Pelican waterproof cases, bigger than the 1120 and more portable than the 1200.
💬 Common Questions & Answers
Is the Pelican 1150 Case waterproof?
Yes. The Pelican 1150 Case is rated IP67, which means it is dust-tight and protected against immersion in water up to one meter deep for 30 minutes. A polymer O-ring seals the lid against the base, and an automatic pressure equalization valve keeps water out while balancing the air pressure inside. Keep the O-ring clean and seated in its groove, because sand or hair on the seal is the main reason any waterproof case leaks.
What fits inside a Pelican 1150 Case?
The Pelican 1150 Case has an interior of 8.29 by 5.79 by 3.75 inches. Pelican designed the 1150 for pocket-size digital cameras, action cameras, camera accessories, GPS units and other small electronics. A smartphone, keys, a wallet and a passport fit as well. A full-size DSLR with a lens attached does not fit, so step up to the Pelican 1200 or a larger Pelican case for bigger camera gear.
Can I take the Pelican 1150 Case on a plane?
The Pelican 1150 Case measures 9.44 by 7.80 by 4.29 inches on the outside, small enough to pack inside a carry-on bag or a checked suitcase. Its automatic pressure equalization valve balances the air pressure inside the case after altitude changes, so the lid opens easily when you land. A padlock hole lets you lock the case for travel. Check your airline's rules for what you pack inside it.
Is the Pelican 1150 Case crushproof and heavy duty?
Yes. The Pelican 1150 Case uses a polypropylene shell with an open cell core and solid wall design, which keeps the case strong and light. Stainless steel hinge pins resist corrosion, and the double-throw latch holds the lid shut through drops and bumps. Pelican rates the 1150 for use from -40°F to 210°F, so the Pelican 1150 Case works as a heavy duty dry box in hot cars, cold boats and dusty job sites.
Does the Pelican 1150 Case come with foam?
Yes. The Pelican 1150 Case sold at Angies Boutique comes with Pick N Pluck foam and convoluted lid foam. The pre-scored foam cubes pull out by hand, so you can create a custom cutout for each item without tools. Leave about an inch of foam between your gear and the walls of the case for the best impact protection. Replacement foam sets are available from Pelican when your gear changes.
Does the Pelican 1150 Case have a guarantee?
Yes. Pelican backs its Protector cases, including the Pelican 1150 Case, with the Pelican Lifetime Guarantee of Excellence. The guarantee comes from Pelican, the manufacturer, and Pelican handles any claims directly. Pelican has built Protector cases since 1976, and every Pelican 1150 Case sold by Angies Boutique is a genuine Pelican product made in the USA.
Summary: The Pelican 1150 Case is an IP67 waterproof, crushproof hard case with foam, sized for small electronics and backed by Pelican's lifetime guarantee.
🛒 Complete Your Gear Protection
Choose your color in the selector above. If your gear is a little larger than a phone and an action camera, the Pelican 1200 Case gives you more interior room with the same IP67 seal and crushproof shell. For the smallest kit, the Pelican 1120 Case holds a phone, keys and cards. Pair two sizes to cover both everyday carry and travel.
Summary: Pair the Pelican 1150 with a larger Pelican case to protect every size of gear you carry.
✅ Authentic & Ready to Ship
The Pelican 1150 Case sold by Angies Boutique is a genuine Pelican Protector case, made in the USA and backed by Pelican's Lifetime Guarantee of Excellence. Angies Boutique offers same-day in-store pickup and same-day delivery in Los Angeles from 838 N Broadway, Los Angeles, CA 90012, and ships to all 50 states and worldwide. Standard Shopify checkout is supported on web and mobile.
Summary: The Pelican 1150 Case is authentic, guaranteed by Pelican, and ready to ship or pick up in Los Angeles.
Envío gratuito en pedidos superiores a $50
Devoluciones en 30 días: ¿No está satisfecho? Devuélvalo dentro de 30 días para obtener un reembolso completo. Los artículos deben estar sin usar y en su embalaje original.
Procesamiento rápido: ¡ Los pedidos realizados antes de las 2 p. m. EST se envían el mismo día!
Embalaje discreto: todos los pedidos se envían en un embalaje sencillo para su privacidad.