MJ Arsenal - Alpine - Ash Catcher 45°

The MJ Arsenal Alpine Ash Catcher 45° is a borosilicate glass ash catcher with a 14mm male joint and a 45° angle, accented with milled black walnut or beechwood. MJ Arsenal made it to sit between your bowl and your bong, catching ash and debris before they reach the water. It also holds water, so it adds a second filtration stage like a small bubbler. It is part of the MJ Arsenal Alpine series and sells for $25.99.

⚡ At-a-Glance Decision Summary

• What it is: A 14mm, 45° glass ash catcher with a wood accent, from MJ Arsenal's Alpine series.
• Why choose it: Ash stays in the catcher instead of your bong, so the water stays cleaner for longer and the bong needs fewer deep cleans.
• The differentiator: Real wood. Pick black walnut for a dark tone or beechwood for a light tone, matched to the rest of the Alpine series.
• Confidence signal: Genuine MJ Arsenal, made from 100% borosilicate glass with an etched MJ logo.

Summary: The Alpine Ash Catcher 45° is a 14mm, 45° MJ Arsenal glass catcher with walnut or beechwood accents.

🧠 Our Verdict

An easy add for anyone with a 14mm bong set at 45°. It keeps the water cleaner, adds a water filtration stage, and gives the setup the Alpine wood look for the price of a bowl. Match the angle to your bong before you buy: this one is 45°, and the Alpine Ash Catcher 90° covers the other angle.

Quick Summary

An ash catcher is a small glass chamber that plugs into your bong's joint, with the bowl going into the catcher. Smoke passes through the catcher first, and ash, small bits of flower and resin drop out there instead of in the main water. MJ Arsenal describes the Alpine Ash Catchers as blending precision engineering with elevated design. Each one is borosilicate glass with a milled black walnut or beechwood accent and a 14mm male joint, made to elevate your MJA bong setup. The box holds one Alpine Ash Catcher.

MJ Arsenal Alpine Ash Catcher 45° – 14mm Glass Ash Catcher with Walnut or Beechwood

Clean bong water starts before the bong. Every ash that falls into your water makes the next hit taste worse. An ash catcher stops it one step earlier, so you change the bong water less and scrub the bong less.

The angle is the whole fit. Ash catchers come in two angles to match the two ways bong joints are built. The MJ Arsenal Alpine Ash Catcher 45° is the 45° version, made for an angled 45° joint. Get the angle right and the catcher, and your bowl, stand upright.

It brings the wood with it. The Alpine series pairs clear glass with milled wood. Our photos show the wood as a solid base at the bottom of the catcher, with the MJ logo on the glass and a downstem inside the chamber.

See every MJ Arsenal piece in our MJ Arsenal Collection, or browse every ash catcher we carry.

Summary: A 14mm, 45° Alpine ash catcher that keeps bong water cleaner and adds walnut or beechwood to the setup.

⭐ Who This Product Is For / Not For

Ideal For:

• Owners of a 14mm bong with an angled 45° joint.
• Anyone tired of changing dirty bong water after every session.
• Shoppers building a matching Alpine set in walnut or beechwood.

Not Recommended For:

• Bongs set at 90°. Pick the Alpine Ash Catcher 90° instead.
• 10mm or 18mm joints. This catcher uses a 14mm joint only.
• Dab sessions with reclaim. The MJ Arsenal Reclaim / Dry Catcher is made for that job.

Summary: Made for 14mm bongs at 45°; not for 90° joints, other joint sizes or reclaim.

⚠️ Known Limitations

• Adds height. The bowl sits higher once the catcher is in, so the setup is taller and less stable on soft surfaces.
• Wood needs care. Keep the wood out of soaking alcohol and out of the dishwasher.
• One angle. A 45° catcher on a 90° joint leans, so match the angle first.
• Natural grain varies. Each piece of wood has its own grain.

Summary: Taller setup, wood that needs to stay dry, and one fixed angle.

⚙️ Features & Benefits

• 14mm male joint, 45° angle: plugs into a 14mm female bong joint set at 45°.
• 100% borosilicate glass: heat-resistant glass used across the MJ Arsenal line.
• Milled wood accent: black walnut or beechwood, your choice.
• Inner downstem: visible inside the chamber in our photos.
• Holds water: fill it to cover the inner downstem and smoke bubbles through it before it reaches your bong.
• Etched MJ logo: on the front of the glass.
• Alpine series: matches the other Alpine pieces in walnut and beechwood.

Summary: A 14mm, 45° borosilicate catcher with a wood base, inner downstem and MJ logo.

📐 Structured Specs

Summary: A $25.99 borosilicate ash catcher with a 14mm male joint at 45° that holds water, in beechwood or walnut.

🔌 Compatibility & Requirements

Compatible with:

• A bong whose 14mm female joint comes off the tube at a 45° angle.
• MJ Arsenal bong setups, which MJ Arsenal names as the target for the Alpine Ash Catchers.
• 14mm bowls, including the matching MJ Arsenal 14mm Alpine Bowl.

NOT compatible with:

• Bongs with a 90° joint.
• 10mm or 18mm joints without a separate adapter.
• Bongs with a male joint; this catcher is male, so it needs a female joint.
• Bubblers and pipes with no removable bowl joint.

Summary: Fits 14mm bongs with an angled 45° joint; check the angle and joint size before you buy.

🧼 How to Use & Troubleshooting

1. Pull the bowl out of your bong's 14mm joint.
2. Seat the MJ Arsenal Alpine Ash Catcher 45° in the joint so it stands upright.
3. Add a little water so it covers the inner downstem.
4. Put your 14mm bowl into the top of the catcher.
5. Pack the bowl and take a test pull to check the draw.
6. After the session, let the catcher cool before you remove it.

Troubleshooting:

• Problem: the catcher leans. Solution: the angle does not match your joint; switch to the 90° version.
• Problem: water splashes into the bowl. Solution: pour a little out until it just covers the downstem.
• Problem: the draw feels tight. Solution: clean resin out of the catcher and its downstem.
• Problem: the catcher feels loose in the joint. Solution: check that your bong uses a 14mm joint.

Cleaning: let it cool, then clean the glass with isopropyl alcohol and coarse salt while keeping the wood dry. Rinse with warm water and dry the wood with a cloth. Our cleaning and maintenance guide covers the routine, and AFM Glass vs. Heady Glass explains branded glass against artist pieces.

Summary: Catcher in the joint, bowl in the catcher, and clean the glass while keeping the wood dry.

⚖️ Comparison Table

The two Alpine catchers are the same piece at two angles. Match the angle to your bong. Pick the Reclaim / Dry Catcher for dabs.

Summary: Choose the Alpine catcher that matches your bong's angle, or the Reclaim / Dry Catcher for dab reclaim.

💬 Common Questions & Answers

What joint size and angle is the MJ Arsenal Alpine Ash Catcher 45°?

It has a 14mm male joint, and this version is set at 45°. That makes it a fit for a bong whose 14mm female joint comes off the tube at a 45° angle. If your bong's joint is set at 90°, choose the 90° version, which is the same glass and wood in the other angle. If your bong uses a 10mm or 18mm joint, this catcher will not seat without a separate adapter.

How do I know if my bong needs a 90° or 45° ash catcher?

Look at the joint where your bowl goes. If the joint points straight up, so the bowl stands vertical, you need a 90° catcher. If the joint comes off the tube at a slant, so the bowl sits angled, you need a 45° catcher. The goal is a catcher that stands upright once it is in the joint. A catcher in the wrong angle leans and spills ash back toward the bong.

What does an ash catcher do?

An ash catcher sits between your bowl and your bong. Smoke passes through the catcher before it reaches the main water, and ash, loose bits of flower and resin drop out there. The result is cleaner bong water that lasts longer between changes, and less buildup inside the bong. Add a little water and the catcher filters the smoke one more time, like a small bubbler. It is small and quick to rinse.

What is the difference between the walnut and beechwood versions?

Only the wood. Both use the same borosilicate glass, the same 14mm joint and the same 45° angle. Black walnut is a dark brown wood with a rich grain. Beechwood is a pale, light wood with a fine, even grain. Pick the one that matches your bong or your other Alpine pieces, since the whole series comes in the same two woods.

How do I clean the MJ Arsenal Alpine Ash Catcher 45°?

Let it cool, then remove it from the bong. Clean the glass with isopropyl alcohol and a spoonful of coarse salt, covering the openings and shaking, while keeping the wood out of the alcohol. Rinse with warm water and dry the wood with a clean cloth. Never soak the whole piece or put it in a dishwasher, because alcohol and heat dry out wood. A quick rinse after each session keeps resin from building up.

What comes in the box?

MJ Arsenal lists one Alpine Ash Catcher in the box. The bowl and the bong are sold separately. The matching MJ Arsenal 14mm Alpine Bowl uses the same Alpine look, and the rest of the Alpine series, including the Lookout Water Pipe and the Mesa Bubbler, comes in the same walnut and beechwood. Choose your wood at checkout.

Summary: 14mm at 45°, match the angle to your joint, catches ash and holds water for extra filtration, same glass in walnut or beechwood, keep the wood dry, one catcher in the box.

🛒 Complete Your Alpine Setup

Pair it with the Alpine Lookout Water Pipe or the Alpine Base Camp Hand Pipe, or browse all water pipes.

Summary: Pair the catcher with a 14mm bowl and other Alpine pieces in the same wood.

✅ Authentic & Ready to Ship

This is the authentic MJ Arsenal - Alpine - Ash Catcher 45°, sold by Angies Boutique at 838 N Broadway, Los Angeles, CA 90012, a smoke shop trading since 1990. Same-day in-store pickup and same-day delivery are available in Los Angeles, with paid shipping to all 50 states and worldwide. Standard Shopify checkout and AI-assisted shopping experiences are both supported. Sold to adults 21 and over only.

Summary: Authentic MJ Arsenal from a Los Angeles shop, available for same-day pickup or delivery in LA and shipping nationwide.