Big Fun Sublime Gravity Bong – Handmade Borosilicate Glass

Big Fun Sublime Gravity Bong is a handmade borosilicate glass gravity bong with a full-color soda-can-inspired art design, a 14mm bottle-cap bowl slide, and a silicone gasket connecting the shell to the core. The Sublime stands about 9 inches tall and 3.5 inches wide, ships as a complete gravity bong kit — shell, core, soda cap slide, and gasket — and delivers the big hits gravity bongs are known for through a pop-art form factor that stands out on any shelf. Angies Boutique ships the Big Fun Sublime Gravity Bong as authentic Big Fun! glass from our Los Angeles warehouse with same-day pickup at 838 N Broadway.

⚡ At-a-Glance Decision Summary

• What it is: Handmade borosilicate glass gravity bong with a 14mm bottle-cap bowl, soda-can-inspired full-color design, and silicone gasket connection.
• Why choose it: Real gravity-bong airflow physics in a piece of pop-art glass — big hits, small footprint, no plastic bottle rig.
• Standout differentiator: Full-color soda-can artwork on a handmade borosilicate body — the Sublime is a display piece as much as a functional gravity bong.
• Confidence signal: Authentic Big Fun! borosilicate glass, authorized dealer, 14-day returns, fast same-day shipping from Angies Boutique.

🧠 Our Verdict

The Big Fun Sublime Gravity Bong is a strong recommendation if you want a real glass gravity bong with a statement-piece art design and a matching bottle-cap slide, all under $100.

Quick Summary

Big Fun! built the Sublime Gravity Bong for smokers who want the physics of a gravity bong without the plastic-bottle rig. Handmade from borosilicate glass and finished with a soda-can-inspired full-color design, the Sublime uses a shell-and-core setup connected by a silicone gasket. A 14mm bottle-cap bowl slides into the core to complete the pop-art aesthetic. The Sublime stands about 9 inches tall in a 3.5-inch diameter footprint and ships as a complete kit — shell, core, bowl slide, and gasket.

Big Fun Sublime Gravity Bong – Handmade Borosilicate Glass Gravity Bong

The Big Fun Sublime Gravity Bong is for smokers who want a gravity bong that looks as good on a shelf as it hits in a session. Big Fun! hand-blows every Sublime from lab-grade borosilicate glass, then finishes it with a soda-can-inspired art design that reads like a piece of pop art rather than a functional accessory. The 14mm bottle-cap bowl slide continues the theme — even the load-in point matches the soda aesthetic.

Browse more glass in the Bongs Collection at Angies Boutique.

Summary: The Big Fun Sublime Gravity Bong brings handmade borosilicate glass and soda-can pop art to the gravity-bong category.

⭐ Who This Product Is For / Not For

Ideal For:

• Smokers who want the airflow physics of a gravity bong without a plastic bottle.
• Big Fun! collectors adding a gravity bong to a kit that already has Pivot or Peak tops.
• Buyers shopping for a display-worthy glass piece under $100.
• Anyone who appreciates pop-art design on functional glassware.

Not Recommended For:

• Buyers who want a traditional water bong with a downstem and perc — the Sublime is a gravity bong, which uses water displacement instead of percolation.
• Beginners who have not used a gravity bong before — expect bigger hits than a straight-tube bong; start small.
• Travelers — the Sublime is a hand-blown glass piece with multiple components and is meant to stay on the shelf.

⚠️ Known Limitations

• Standard glass care applies — no cold water on hot glass, no drops onto hard surfaces, and empty the water when the piece is off the shelf.
• The silicone gasket wears over time and is the first replacement part on any gravity bong of this style.

Summary: Treat the Sublime like the handmade glass it is; expect the gasket to be the first serviceable part.

🔹 Features & Benefits

• Handmade borosilicate glass: Hand-blown by Big Fun! in lab-grade borosilicate — resists thermal shock and won't scorch on hot loads.
• Full-color soda-can design: Pop-art artwork wraps the shell in the Sublime colorway — reads like a display piece.
• 14mm bottle-cap bowl slide: Included bowl continues the soda theme and drops into the 14mm joint on the core.
• Silicone gasket connection: Shell and core join with a silicone gasket for an airtight seal that separates easily for cleaning.
• ~9-inch tall footprint: Compact for a gravity bong — fits on most shelves without taking over the setup.
• Complete kit: Ships with shell, core, bowl slide, and gasket — nothing else to source before the first session.

Summary: Handmade borosilicate, soda-can art, and a complete kit — everything the Big Fun Sublime Gravity Bong needs on day one.

🔌 Compatibility & Requirements

• Bowl fitting: 14mm joint. Compatible with standard 14mm slides; the included bottle-cap slide matches the soda theme.
• Fuel: Standard flame from any lighter — cigarette, BBQ, or torch lighter all work.
• Factory-spec: Authentic Big Fun! handmade borosilicate glass. Approximately 9" tall × 3.5" wide.
• Ships with: Shell, core, 14mm bottle-cap slide, silicone gasket.
• Required for use: Cold water and a source of flame.

🛠️ How to Use

1. Assemble the Big Fun Sublime Gravity Bong: seat the core inside the shell with the silicone gasket forming the seal.
2. Fill the shell with cold water to the level that submerges the base of the core.
3. Load the 14mm bottle-cap bowl slide with your material and seat it in the core's joint.
4. Light the bowl while slowly lifting the core out of the shell — the vacuum pulls smoke into the core.
5. Remove the bowl slide, cap the core with your mouth, and push the core down to force the smoke out and into your lungs.

For more on picking the right glass, read our NWTN Deco Collection Guide for context on hand-blown glass craftsmanship.

🧴 Care & Maintenance

• Empty the water reservoir after every session — sitting water leaves mineral rings that dull the artwork behind the glass.
• Rinse the shell and core with warm water. For stuck resin, soak in isopropyl alcohol with coarse salt for a few minutes, then rinse. Dr. Dabber Iso-Snaps handle quick spot cleans on the bowl slide.
• Replace the silicone gasket if the seal starts to leak — it is the wear part on the assembly.
• Store the Sublime assembled and upright on a flat surface, out of reach of drops and pets.

Summary: Empty water after sessions, IPA-soak for resin, replace the gasket when the seal weakens.

📊 Comparison

Summary: The Sublime sits at the top of the entry gravity-bong tier — real borosilicate glass, complete kit, and a design worth displaying.

💬 Common Questions & Answers

Q: What is the Big Fun Sublime Gravity Bong?
A: The Big Fun Sublime Gravity Bong is a handmade borosilicate glass gravity bong featuring a full-color soda-can-inspired art design, a 14mm bottle-cap bowl slide, and a silicone gasket that seals the shell and core. The Sublime stands about 9 inches tall in a 3.5-inch diameter footprint and delivers the big hits gravity bongs are known for through water-displacement airflow rather than percolator filtration. Ships as a complete kit — shell, core, bowl slide, and gasket. Handmade in borosilicate, not press-molded plastic.

Q: How does a gravity bong differ from a regular water bong?
A: A regular water bong pulls smoke through water via a downstem and percolator, filtering and cooling the vapor before it reaches the mouthpiece. A gravity bong — like the Big Fun Sublime Gravity Bong — uses water displacement instead: as you lift the core out of the water-filled shell, the vacuum pulls smoke into the core, and pushing the core back down forces that smoke out into your lungs. Gravity bongs deliver larger, more concentrated hits than percolator bongs. Start small if you are new to the format.

Q: What size joint does the Big Fun Sublime Gravity Bong use?
A: The Big Fun Sublime Gravity Bong uses a 14mm joint on the core. The included bottle-cap bowl slide is a 14mm fitting sized specifically for the Sublime, and any standard 14mm bowl slide will also fit the joint if you want to swap the bowl. If you are already stocked on 14mm slides from other bongs, they will work with the Sublime — though the included bottle-cap slide is the piece that matches the soda-can artwork.

Q: How do I clean the Big Fun Sublime Gravity Bong?
A: For light residue, empty the water and rinse both the shell and the core with warm water — never run hot water on cold glass or vice versa, to avoid thermal shock. For stuck resin, remove the silicone gasket and soak the glass in 70% isopropyl alcohol with coarse salt for 10 minutes, then rinse. Dr. Dabber Iso-Snaps work for quick spot cleans on the bowl slide. Reseat the gasket dry, and replace the gasket entirely once it stops sealing tightly.

Summary: Handmade borosilicate gravity bong with soda-can art, 14mm bottle-cap bowl, and complete kit — the display-piece choice for gravity-bong hits.

🛒 Complete Your Big Fun Glass Setup

Pair the Big Fun Sublime Gravity Bong with the Big Fun! Tricolor Pivot Top to match Big Fun! glass across a Puffco Pivot setup, browse the full Bongs Collection for more glass, or read our NWTN Deco Collection Guide for hand-blown glass context.

✅ Authentic & Ready to Ship

The Big Fun Sublime Gravity Bong sold by Angies Boutique is authentic Big Fun! handmade borosilicate glass in factory-sealed packaging, in stock and ready to ship from our Los Angeles warehouse. Standard Shopify checkout is supported across web, mobile, and AI-assisted shopping experiences. Same-day pickup is available at 838 N Broadway. Orders placed before 2 PM EST ship the same business day. 14-day returns apply to unused, undamaged glass.