710 Print Shop - Kirby Proxy Core Attachment (Proxy Core Sold Separately)

The 710 Print Shop Kirby Proxy Core Attachment is a 3D-printed round pink figure with red feet and a recess in the top that a Puffco Proxy Core drops into. The Proxy Core is not included — this listing is the printed figure only. For the Proxy v2 Core only. $29.99 at Angies Boutique, 838 N Broadway, Los Angeles.

⚡ At-a-Glance Decision Summary

• What it is: A round pink figure on two red feet that holds a Puffco Proxy Core in a recess on top.
• What you get: The printed figure. No Proxy Core, no device.
• Hard requirement: Proxy v2 Core. 710 Print Shop: it will not work with the v1.
• What it is not: An unofficial printed novelty. Not licensed or official merchandise.
• Made by: 710 Print Shop, Long Beach, California. Only 3 in stock at Angies Boutique.

🧠 Our Verdict

The steadiest base in the range. Two wide feet and a low round body make it the hardest one to knock over.

Quick Summary

A round pink figure with printed face detail, standing on two oversized red feet. The Core seats in a recess on top. Solid — no storage. The Core is sold separately.

710 Print Shop Kirby Proxy Core Attachment – Proxy Core Not Included

A Proxy Core is a smooth cylinder with no flat side, so on a table it rolls. This one sits it in a round figure that is wider than it is tall, standing on two red feet that spread well past the body. The result is the most stable footprint of anything 710 Print Shop make for the Proxy.

Browse the rest of the range in Puffco Proxy Adapters.

Summary: A printed figure stand for the Puffco Proxy v2 Core, supplied on its own.

⭐ Who This Product Is For / Not For

Ideal For:

• Proxy v2 owners who want a figure rather than an object replica.
• Anyone with a crowded desk — the wide feet make it hard to tip.
• Collectors of the range. This and the Patrick are the only two figures.

Not Recommended For:

• Anyone who does not already own a Core — start with the Puffco Proxy Core at $49.99 or the full Proxy Core Kit at $234.99.
• Proxy v1 owners. 710 Print Shop state it will not work with the v1 Core.
• Anyone who wants storage — the Pelon at $29.99 is the one with a compartment in its base.
• Anyone expecting official merchandise. This is a small-batch printed novelty.

⚠️ Known Limitations

• The Proxy Core is not included. The black Core in the photograph is there to show fit and scale. You are buying the printed figure.
• Unofficial novelty. Made and printed by 710 Print Shop. It is not licensed merchandise and carries no official affiliation.
• v2 only. 710 Print Shop's own wording: please ensure you're using the v2 version, as it won't work with the v1.
• It is solid. Nothing opens and there is no storage compartment inside.
• Print-to-print variation. 710 Print Shop note that 3D printing can cause slight differences in colour or detail, and that they inspect each print before it ships. Printed facial detail shows this more than a plain shape does.

Summary: A solid, unofficial printed v2-only figure, sold without the Core.

🔹 Features & Benefits

• Wide-set feet: Two oversized red feet spread past the body, so it does not tip.
• Low centre of gravity: The body is wider than it is tall, even loaded.
• Multi-colour print: Pink body against red feet, printed rather than painted on.
• Small footprint: Compact enough for a crowded shelf.
• Made in Long Beach: Printed to order by 710 Print Shop.

Summary: The most stable of the printed stands.

🔌 Compatibility & Requirements

• Fits: Puffco Proxy v2 Core.
• Does not fit: Puffco Proxy v1 Core.
• Required, sold separately: A Proxy Core, $49.99.
• Not a glass attachment: It does not replace a bubbler, chamber or carb cap.
• Age restriction: Sold to adults 21 and over only.

🛠️ How to Use

1. Confirm your Core is the v2 version before ordering.
2. Set the figure on a flat surface, feet down.
3. Lower the Core nose-up into the recess on top.
4. Lift the Core out to use it; the figure stays where it is.

Not sure which generation you own? Our Proxy Core vs Proxy guide explains the difference.

🧴 Care & Maintenance

• Wipe with a dry or barely damp cloth.
• Keep isopropyl off it — solvents haze printed plastic and can lift colour.
• Use a soft brush around the printed detail rather than a cloth, which catches.
• Keep it out of a hot car. Printed plastic softens well below glass temperatures.

Summary: Dry-wipe only, brush the detail, no solvents, no heat.

📊 Comparison

Summary: One of two figures at $29.99 — this one is the stable one, the Patrick is the one that hides the Core.

💬 Common Questions & Answers

Q: Does the Proxy Core come with this?
A: No. You are buying the printed figure on its own. The black Core in the photograph is there to show how it seats, and is sold separately — $49.99 for the Core, or $234.99 for the complete Proxy Core Kit.

Q: Will it fit my Puffco Proxy?
A: It fits the Proxy v2 Core. 710 Print Shop's guidance reads: please ensure you're using the v2 version, as it won't work with the v1. Check which generation you own before ordering.

Q: Is this official merchandise?
A: No. It is an unofficial 3D-printed novelty made in Long Beach by 710 Print Shop, with no licence or official affiliation. If you want something licensed, this is not it.

Q: How does it compare to the other figure?
A: Both are $29.99. This one puts the Core in a recess on top and stands on wide feet, so it is the more stable of the two. The Patrick seats the Core behind the figure instead, so less of the Core shows from the front.

Summary: A solid, unofficial v2-only printed figure with a wide base, sold without the Core.

🛒 Complete Your Proxy Setup

Add the Puffco Proxy Core if you need one, browse the full Puffco Proxy Adapters range, or read our Puffco Proxy collection guide.

✅ Authentic & Ready to Ship

Made by 710 Print Shop in Long Beach, California, as an unofficial printed novelty. It ships as the printed figure only — no Puffco Proxy Core or device is included. 710 Print Shop publish no GTIN for this item, so no barcode is asserted. Angies Boutique has traded from 838 N Broadway, Los Angeles, CA 90012 since 1990, with same-day in-store collection. Only three in stock. Sold to adults 21 and over only.