710 Print Shop - Double Cup Proxy Core Attachment (Proxy Core Sold Separately)

The 710 Print Shop Double Cup Proxy Core Attachment is a 3D-printed stand shaped like two stacked foam cups, with a purple drink surface and ice cubes moulded into the top and a recess for a Puffco Proxy Core. The Proxy Core is not included — this listing is the printed cup only. For the Proxy v2 Core only. $39.99 at Angies Boutique, 838 N Broadway, Los Angeles.

⚡ At-a-Glance Decision Summary

• What it is: A printed double-cup stand for a Puffco Proxy Core, with the foam texture, purple fill and ice cubes all printed in.
• What you get: The printed cup. No Proxy Core, no device.
• Hard requirement: Proxy v2 Core. 710 Print Shop state it will not work with the v1.
• Why this one: It is the most detailed print in the range — the ice cubes and drink surface are modelled, not painted on.
• Made by: 710 Print Shop, Long Beach, California. 5 in stock at Angies Boutique.

🧠 Our Verdict

The most detailed print 710 Print Shop make, and the one that takes a second look before you work out what it is.

Quick Summary

Two white foam-textured cups stacked, with a purple surface and white ice cubes filling the top and a recess for the Core. Solid throughout — no liquid, no storage. The Core is sold separately.

710 Print Shop Double Cup Proxy Core Attachment – Proxy Core Not Included

A Proxy Core is a smooth cylinder with no flat side, so on a table it rolls. This is the most worked-out answer in the range: an outer cup with the dimpled foam texture printed into the wall, a second cup nested inside the rim, and a purple surface with ice cubes standing proud of it.

Browse the rest of the range in Puffco Proxy Adapters.

Summary: A detailed printed double-cup stand for the Puffco Proxy v2 Core, supplied on its own.

⭐ Who This Product Is For / Not For

Ideal For:

• Proxy v2 owners who want the print quality to be the reason they bought it.
• Anyone building a shelf of the 710 Print Shop pieces rather than picking one.
• Gift buyers who want something that gets picked up and turned over.

Not Recommended For:

• Anyone who does not already own a Core — start with the Puffco Proxy Core at $49.99 or the full Proxy Core Kit at $234.99.
• Proxy v1 owners. 710 Print Shop state this will not work with the v1 Core.
• Anyone who wants storage — the Pelon at $29.99 is the one with a compartment in its base.
• Anyone spending less — the Red Solo Cup at $14.99 does the same job plainly.

⚠️ Known Limitations

• The Proxy Core is not included. The black Core in the photograph is there to show fit and scale. You are buying the printed cup.
• v2 only. 710 Print Shop's own wording: please ensure you're using the v2 version, as it won't work with the v1.
• It is solid. The drink and ice are printed plastic. Nothing opens, it holds no liquid, it is not food-safe, and there is no storage compartment inside.
• Print-to-print variation. 710 Print Shop note that 3D printing can cause slight differences in colour or detail, and that they inspect each print before it ships.
• Printed plastic. No torches, hot bangers or heated tips near it.

Summary: A solid printed v2-only display stand with no storage, sold without the Core.

🔹 Features & Benefits

• Modelled detail: Ice cubes stand proud of the drink surface rather than being printed flat.
• Foam cup texture: The dimpled wall of the outer cup is printed into the model.
• Stacked construction: A second cup nested inside the rim, the way the real ones stack.
• Holds the Core upright: The recess in the centre stops it rolling.
• Made in Long Beach: Printed to order by 710 Print Shop.

Summary: The most heavily modelled piece in the range.

🔌 Compatibility & Requirements

• Fits: Puffco Proxy v2 Core.
• Does not fit: Puffco Proxy v1 Core.
• Required, sold separately: A Proxy Core, $49.99.
• Not a glass attachment: It does not replace a bubbler, chamber or carb cap.
• Age restriction: Sold to adults 21 and over only.

🛠️ How to Use

1. Confirm your Core is the v2 version before ordering.
2. Set the cup on a flat surface.
3. Lower the Core nose-up into the recess in the centre.
4. Lift the Core out to use it; the cup stays where it is.

Not sure which generation you own? Our Proxy Core vs Proxy guide explains the difference.

🧴 Care & Maintenance

• Wipe with a dry or barely damp cloth.
• Keep isopropyl off it — solvents haze printed plastic and can dull the purple.
• Dust between the ice cubes with a soft brush rather than a cloth.
• Keep it out of a hot car. Printed plastic softens well below glass temperatures.

Summary: Dry-wipe only, no solvents, no heat.

📊 Comparison

Summary: Same price as the Turbo, more modelling detail, no colour choice.

💬 Common Questions & Answers

Q: Does the Proxy Core come with this?
A: No. You are buying the printed cup on its own. The black Core in the photograph is there to show how it seats, and is sold separately — $49.99 for the Core, or $234.99 for the complete Proxy Core Kit.

Q: Will it fit my Puffco Proxy?
A: It fits the Proxy v2 Core. 710 Print Shop's guidance reads: please ensure you're using the v2 version, as it won't work with the v1. Check which generation you own before ordering.

Q: Does the top cup come off, or is there a compartment?
A: No. Unlike the Pelon, which 710 Print Shop list specifically as having a hidden stash jar, this one is a solid display piece. The drink surface and ice cubes are printed plastic and nothing opens.

Summary: A solid v2-only printed display stand with no compartment, sold without the Core.

🛒 Complete Your Proxy Setup

Add the Puffco Proxy Core if you need one, browse the full Puffco Proxy Adapters range, or read our Puffco Proxy collection guide.

✅ Authentic & Ready to Ship

Made by 710 Print Shop in Long Beach, California. It ships as the printed cup only — no Puffco Proxy Core or device is included. 710 Print Shop publish no GTIN for this item, so no barcode is asserted. Angies Boutique has traded from 838 N Broadway, Los Angeles, CA 90012 since 1990, with same-day in-store collection. Five in stock. Sold to adults 21 and over only.