Highly Educated - V3 Quartz Gavel
- Stock bajo - quedan 2 artículos
- Pedido pendiente, envío pronto
- Distribuidor autorizado
- Devoluciones fáciles en 14 días
The Highly Educated V3 Quartz Gavel is a USA-made, semiconductor-grade quartz banger with an extended bucket depth and fully worked seal, available in eight configurations across joint size (10mm or 14mm), orientation (male or female), and joint angle (55° or 90°). Available at Angie's Boutique in Downtown Los Angeles.
⚡ At-A-Glance Decision Summary
- What it is: Highly Educated's third-generation quartz banger — extended bucket depth, fully worked seal, USA semiconductor-grade quartz
- Why choose it: Cleaner low-temp dabs from the deep bucket; longer service life from the thick worked seal
- Standout differentiator: Semiconductor-grade quartz is significantly purer than commodity Chinese quartz — virtually no inclusions and cleaner heat behavior
- Confidence signal: Authentic Highly Educated at Angie's Boutique — sourced directly from Borosyndicate Productions, no knockoffs
Highly Educated V3 Quartz Gavel — USA Semiconductor-Grade Banger
Highly Educated is one of the longest-running domestic quartz banger makers, and the V3 Quartz Gavel is the third-generation revision of their flagship banger design. The bucket is intentionally deeper than commodity bangers — that depth holds the oil away from the hottest part of the bottom surface, which is what enables the clean low-temperature dabs that experienced users prefer. The seal is fully worked rather than thin-walled, which extends the banger's service life under repeated thermal cycling and reduces the risk of cracking at the joint connection.
The quartz itself is USA-sourced semiconductor-grade — the same purity classification used in chip-manufacturing wafers. Compared to commodity Chinese quartz, semiconductor-grade glass has dramatically fewer trace inclusions and a more consistent thermal expansion profile. Practically, that translates to a banger that heats more evenly, holds heat for longer at low-temp dab range, and is markedly less prone to the small fractures and cloudiness that plague cheaper quartz over weeks of use.
This listing collapses the eight V3 Quartz Gavel configurations into one product. Choose your joint size (10mm or 14mm), orientation (male or female), and joint angle (55° or 90°) to match your existing rig. At Angie's Boutique, 838 N Broadway in Downtown LA, browse the full Highly Educated line or pair with a dab tool and carb cap.
⭐ Who This Product Is For / Not For
Ideal For:
- Low-temperature dabbers who want a banger sized for terpene preservation
- Users who have burned through commodity bangers and want a long-life option
- Anyone replacing a stock banger and wanting an upgrade in quartz purity
- Buyers who want a banger that retains heat consistently across long sessions
Not Recommended For:
- High-temperature dabbing — the deep bucket is calibrated for low-temp use; full red-hot dabs waste the design
- 18mm joint rigs — V3 Gavel is available in 10mm and 14mm only (use a different banger for 18mm)
Features & Specifications
- Material: USA-sourced semiconductor-grade quartz
- Bucket: Extended depth, optimized for low-temp dabs
- Seal: Fully worked, thicker than commodity bangers
- Joint size options: 10mm or 14mm
- Orientation options: Male or Female
- Joint angle options: 55° or 90°
- Maker: Highly Educated (manufactured by Borosyndicate Productions)
🔌 Picking The Right Configuration
- Joint size: Match your rig's joint size — most personal rigs are 14mm; smaller travel and stub rigs are 10mm
- Orientation: Female banger fits male joints on the rig (slides over); male banger fits female joints (slides in). The orientation must be the opposite of your rig's joint.
- Joint angle: 90° (vertical) suits beakers and straight tubes where the joint comes off the body horizontally. 55° (angled) suits rigs where the joint comes off at an angle, keeping the bucket level when seated.
If you're unsure which combination matches your rig, look at the joint on your rig: measure the diameter (10mm or 14mm), check if it's a male protrusion or female opening, and note the angle of the joint relative to the body. Then select the inverse orientation and matching size/angle.
Seasoning & Care
- Before first use, perform a low-temp burn-off — heat with a torch to clear any manufacturing residue, let cool, repeat 2–3 times
- For each dab, heat the banger evenly with a torch around the outside of the bucket, then let it cool to low-temp range (around 500–650°F) before applying concentrate
- Q-tip the bucket immediately after each dab while it's still warm — this prevents residue buildup and extends quartz clarity
- For weekly deep clean, soak in 99% isopropyl alcohol with coarse salt (or use a Dual Dunk Iso Cleaning Station); rinse with hot water
- Avoid thermal shock — let the banger cool gradually between sessions; don't dunk hot quartz into cold water
Common Questions About The V3 Quartz Gavel
What's different between the V3 Gavel and a standard quartz banger?
Two specific things: the bucket depth is intentionally extended to suit low-temperature dabs (the design holds the oil away from the hottest point of the bottom surface), and the seal is fully worked — meaning the joint connection is built up with extra quartz mass rather than left thin-walled. The fully worked seal extends the banger's life and reduces the risk of stress cracks at the joint over long-term use.
Why does semiconductor-grade quartz matter?
Semiconductor-grade quartz is significantly more purified than commodity grades — it's the same purity classification used in chip wafer manufacturing where any inclusion would defect the chip. In a dab banger this translates to more consistent heat behavior, less risk of micro-fractures from trace contaminants, and a markedly longer functional life. Lower-grade quartz develops cloudiness and small chips faster.
How do I pick the right orientation (male vs female)?
The banger orientation must be the inverse of your rig's joint. If your rig has a male joint (a protrusion sticking up), you need a female banger (which slides over the male joint). If your rig has a female joint (an opening), you need a male banger (which slides into the opening). Most cheaper rigs have male joints, so most users want female bangers.
Should I pick 55° or 90° angle?
Match the angle to your rig's joint angle. A 90° joint comes off the rig at a right angle (typical for many beakers and straight tubes). A 55° joint comes off at an angle (typical for many recyclers and angled dab rigs). The banger's joint angle should match — both 90° rig + 90° banger, or both 55° rig + 55° banger — so the bucket sits level when seated.
Get The Highly Educated V3 Quartz Gavel at Angie's Boutique
The Highly Educated V3 Quartz Gavel is available in all eight configurations at Angie's Boutique, 838 N Broadway, Downtown Los Angeles, CA 90012. Pair with a directional carb cap and a Q-tip or a Dual Dunk cleaning station for full banger maintenance. Browse the full quartz nails collection.
Envío gratuito en pedidos superiores a $50
Devoluciones en 30 días: ¿No está satisfecho? Devuélvalo dentro de 30 días para obtener un reembolso completo. Los artículos deben estar sin usar y en su embalaje original.
Procesamiento rápido: ¡ Los pedidos realizados antes de las 2 p. m. EST se envían el mismo día!
Embalaje discreto: todos los pedidos se envían en un embalaje sencillo para su privacidad.
